Function Map; Operation Of Screen - FUTABA 4PL-2.4GHZ Instruction Manual

In this instruction manual, Edit Buttons are represented by the symbols shown below.
Calling the menu screen
The item indicated by the reverse displayed cursor is selected.
The cursor is moved up and down with the (UP) and (DN) buttons.
A screen with the ▼ symbol at the bottom is on the next page.
The figure at the right shows the state in which
STEERING is selected on the menu screen.
DN
Switch of screen
When the (CT) button is pressed after
selecting an item using the (UP) and
(DN) buttons on the HOME screen as
shown in the figure at the right, that
screen can be directly displayed.
For example, when MENU is selected
and the (CT) button is pressed, the
MENU screen can be displayed; when
timer display is selected and the (CT)
button is pressed, the timer setting
screen can be displayed; and when
MODEL is selected and the (CT) but-
ton is pressed, the MODEL RX screen
can be displayed.
32

Function Map

Operation of screen

UP
Edit Buttons
STEERING is selected
on the menu screen.
CT
CT
(MENU screen) (MODEL RX screen)
DN UP
DN UP
Item selection
The items move in the order
shown in the figure above.
CT CT
(TIMER screen)