FUTABA 4PL-2.4GHZ Instruction Manual page 67

2
(Master channel)
Select setup item "MST" by (UP) or (DN) button, and select
the master channel by pressing the (+) or (-) button.
3
(Slave channel)
Select setup item "SLV" by (UP) or (DN) button, and select
the slave channel by pressing the (+) or (-) button.
4
(Left, forward or up side mixing amount adjustment)
Select the setting item "LEFT", "FWRD", or "UP" by (UP) or
(DN) button. Use the (+) or (-) button and adjust the left, for-
ward, or up side mixing amount.
5
(Right, brake or down side mixing amount adjustment)
Select the setting item "RGHT", "BRAK", or "DOWN" by (UP)
or (DN) button. Use the (+) or (-) button and adjust the right,
brake, or down side mixing amount.
6
(Mixing mode setup)
Select setup item "MXMD" by (UP) or (DN) button, and use
the (+) or (-) button to select the mixing mode.
"OFF" :Mixing proportional to master channel operation.
"MIX" :Mixing by master channel another function considered.
7
(Trim mode setup)
Select setup item "TRIM" by (UP) or (DN) button, and use
the (+) or (-) button to select the mixing mode.
"OFF" :Trim is removed.
"ON" :Trim is added.
8
When ending, return to the ADVANCE menu screen by
pressing the (CT) button.
Programmable Mix "PROG MIX"
Channel selection (MST)
STR, THR, CH3, CH4
Initial value :STR
Channel selection (SLV)
STR, THR, CH3, CH4
Initial value :CH3
Mixing amount
-120~0~+120
Initial value: +100
Mixing amount
-120~0~+120
Initial value: +100
Mixing mode (MXD)
OFF, ON
Initial value: OFF
Trim mode (TRIM)
OFF, ON
Initial value: OFF
67