Advertisement
Quick Links
CAUTION:
When mounting a Warn 15,000 or 16,500 lb. Winch, be sure the Trans4mer
Grille Guard for your truck is also certified for the capacity of that winch. Some versions are
limited to 12,000 lbs. only.
1. Install the Carrier between the side members as shown in Figure 1. Use the black bolts
with the black side members. Special fasteners are provided in the stainless steel kits.
FIGURE 1
WARN INDUSTRIES
INSTALLATION INSTRUCTIONS
WARN WINCH CARRIER KIT NO. 62027
For use with Trans4mer Mounting Systems &
7/16 x 1-1/4
ROUND HEAD BOLT
7/16 LOCK WASHER
7/16 NUT
CARRIER
Page 1
Winches up to 16,500 lb.
UPPER BOLT NOT REQUIRED
WHEN NO MATCHING HOLE
EXISTS IN SIDE MEMBER
62028 Rev. B0
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Warn 62027
Summary of Contents for Warn 62027
- Page 1 Winches up to 16,500 lb. CAUTION: When mounting a Warn 15,000 or 16,500 lb. Winch, be sure the Trans4mer Grille Guard for your truck is also certified for the capacity of that winch. Some versions are limited to 12,000 lbs. only.
- Page 2 When installing the Warn 15,000 winch the control box can be adjusted to the rear using the slotted holes in the bracket. The Warn 16.5ti control pack cover is also slotted for adjustment fore and aft.
- Page 3 The loss of use of this product, loss of time, inconvenience, commercial loss or consequential damages are not covered. Warn Industries reserves the right to change the design of any product without assuming any obligation to modify any product previously manufactured.
Need help?
Do you have a question about the 62027 and is the answer not in the manual?
Questions and answers