Advertisement
Table of Contents
As you read these instructions, you will see NOTES, CAUTIONS, and WARNINGS. Each message has a
specific purpose. NOTES are additional information to help you complete a procedure. CAUTIONS are
safety messages that indicate a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury. A CAUTION may also be used to alert against unsafe practice or possible equipment
damage. WARNINGS are safety messages that indicate a potentially hazardous situation, which, if not
avoided could result in serious injury. CAUTIONS and WARNINGS identify the hazard, indicate how to avoid
the hazard, and advise of the probable consequence of not avoiding the hazard. PLEASE WORK SAFELY!
Before You Begin
This kit is compatible with WARN's line of ATV winches. Winch sold separately. Please read WARN's Winching
Technique guide provided with the winch prior to use of this product.
Table of Contents
I.
Parts List ....................................................... 2
II.
Tools Required .............................................. 2
III.
250EX Installation......................................... 3
III.
Maintenance/Care ......................................... 4
WARN® INDUSTRIES
INSTALLATION INSTRUCTIONS
1.5 CI ATV Winch Mounting Kit
Part Number:
Applications:
NOTICE
Winch and equipment Damage
This mount is designed for a 1500 lb. winch.
Using a higher capacity winch may cause severe
damage to the mount or ATV.
Read installation and operating instructions
thoroughly.
69063
HONDA 250EX
PAGE 1
69572 Rev A0
Advertisement
Table of Contents
Related Manuals for Warn 69063
Summary of Contents for Warn 69063
- Page 1 PLEASE WORK SAFELY! Before You Begin This kit is compatible with WARN’s line of ATV winches. Winch sold separately. Please read WARN’s Winching Technique guide provided with the winch prior to use of this product.
- Page 2 Description • Ratchet 68871 Mounting Plate • Sockets: 12mm, 13mm, 1/2”, 7/16” • Wrenches: 12 mm, 13mm, 1/2” 2002 5/16-18 Locking Hex Nut 3870 5/16-18 x 3/4 Hex bolts 1324 5/16 Flat Washer WARN® INDUSTRIES PAGE 2 69572 Rev A0...
- Page 3 Inspect all nuts and bolts on the winch, winch mount, and related hardware prior to each use. Tighten all nuts and bolts that appear to be loose. Stripped, fractured, or bent bolts or nuts need to be replaced WARN® INDUSTRIES PAGE 3 69572 Rev A0...
Need help?
Do you have a question about the 69063 and is the answer not in the manual?
Questions and answers