AEG LF628400 User Manual
  1. Manuals
  2. Brands
  3. AEG Manuals
  4. Washer
  5. LF628400
  6. User manual
AEG LF628400 User Manual

AEG LF628400 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
aeg.com/register
EN User Manual | Washing Machine
LF628400
aeg.com\register

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LF628400 and is the answer not in the manual?

Questions and answers

Related Manuals for AEG LF628400

Summary of Contents for AEG LF628400

  • Page 1 EN User Manual | Washing Machine LF628400 aeg.com\register...

  • Page 2: Table Of Contents

    Welcome to AEG! Thank you for choosing our appliance. Get usage advice, brochures, trouble shooter, service and repair information: www.aeg.com/support Subject to change without notice. CONTENTS 1. SAFETY INFORMATION................2 2. SAFETY INSTRUCTIONS................4 3. PRODUCT DESCRIPTION................6 4. TECHNICAL DATA..................7 5.

  • Page 3: General Safety

    the use of the appliance in a safe way and understand the hazards involved. • Children between 3 and 8 years of age and persons with very extensive and complex disabilities shall be kept away from the appliance unless continuously supervised. •...

  • Page 4: Safety Instructions

    • The ventilation opening in the base must not be covered by a carpet, mat, or any floor covering. • The appliance must be connected to the water mains using the new supplied hose sets, or other new hose sets supplied by the Authorised Service Centre.

  • Page 5: Water Connection

    2.4 Use • Always use a correctly installed shockproof socket. • Make sure that the parameters on the WARNING! rating plate are compatible with the Risk of injury, electric shock, fire, burns electrical ratings of the mains power or damage to the appliance. supply.

  • Page 6: Product Description

    These lamps are intended to withstand • Disconnect the appliance from the mains extreme physical conditions in household electrical and water supplies. appliances, such as temperature, • Cut off the mains electrical cable close to vibration, humidity, or are intended to the appliance and dispose of it.

  • Page 7: Technical Data

    Rating plate Mains cable Drain pump filter Transit bolts Feet for levelling the appliance Hose support Drain hose Inlet hose connection The rating plate reports the model name (A), product number (B), electrical ratings (C) and serial number (D). Mod. xxxxxxxxx Prod.No.

  • Page 8: Positioning And Levelling

    Accessories delivered with the appliance may vary depending on the model. 2. Put the packaging element on the floor behind the appliance and carefully put it down onto its rear side. Remove the polystyrene protection from the bottom. We recommend that you keep the packaging and the transit bolts for any transport of the appliance.

  • Page 9: Water-Stop Device

    the inlet hose is not in vertical position. 45º 45º 20º 20º The appliance must be level and stable. 3. If necessary, loose the ring nut to set it in the correct position A correct adjustment of the appliance WARNING! level prevents the vibration, noise and The inlet water shall not exceed 25 °C.

  • Page 10: Water Drainage

    If this occurs, close the water tap and contact the authorized service centre to replace the hose. You can extend the drain hose to maximum 400 cm. Contact the 5.5 Water drainage authorized service centre to buy the other drain hose and the extension. The drain hose should be positioned at a height of not less than 60 cm and not more than 100 cm from the floor.

  • Page 11: Accessories

    Read carefully the instructions supplied with the accessory. Only appropriate accessories approved by AEG ensure the safety standards of the appliance. If unapproved parts are used, any claims will be invalidated. 6.2 Fixing plate kit If you install the appliance on a plinth that is not an accessory supplied by AEG, secure the appliance in the fixing plates.

  • Page 12: Control Panel

    7. CONTROL PANEL 7.1 Control panel description Programme dial • Only rinse option Display Centrifugeren reduction options touch Startuitstel touch button button • No spin option Tijd besparen touch button • Spoelstop option Start/Pauze touch button Temperatuur touch button Extra touch button •...

  • Page 13: Dial And Buttons

    The digital indicator can show: • Programme duration (e. g. • Delay time (e. g. • Cycle end ( ). • Warning code ( • Indication of total operating hours of the appliance. Refer to the 'Operating hours counter' section in the 'Settings' paragraph for more details.
  • Page 14 • If you touch the Start/Pauze button, the This option is recommended for heavily appliance performs the spinning phase soiled laundry, especially if containing and drains the water. sand, dust , mud and other solid particles. The appliance empties the water out This option can increase the automatically after 18 hours programme duration.

  • Page 15: Programmes

    9. PROGRAMMES 9.1 Programme Chart Washing programmes Programme Programme description Washing programmes Eco 40-60 White cotton and fast-coloured cotton. Normally soiled items. The energy consumption decreases and the time of the washing programme is extended, ensuring good washing results. White and coloured cotton heavily and normally soiled cotton items. Katoen Synthetic items or mixed fabric items.
  • Page 16 Programme Default tempera‐ Reference spin speed Maximum load ture Spin speed range Temperature range 1400 rpm Eco 40-60 8 kg 40 °C 1400 rpm - 800 rpm 40 °C 1400 rpm 8 kg Katoen 1400 rpm - 800 rpm 95 °C - (Cold ) 40 °C 1200 rpm...
  • Page 17 Programme options compatibility OPTIONS Centrifugeren ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ No spin ■ ■ ■ ■ ■ ■ ■ ■ Spoelstop ■ ■ ■ ■ Vlekken Voorwas ■...

  • Page 18: Settings

    Universal pow‐ Liquid Uni‐ Liquid for Delicates Programme Special der 1) versal coloureds woollens ▲ ▲ ▲ Strijkvrij ▲ ▲ ▲ Anti-allergie At temperature higher than 60 °C the use of powder detergent is recommended. ▲ = Recommended -- = Not recommended 9.2 Woolmark Wool Care - Blue The wool wash cycle of this machine has been approved by The Woolmark Company for the washing of wool gar‐...

  • Page 19: Factory Reset

    10.5 Factory Reset operating time of the cycles (does not include pauses, delayed start time). To visualise this This function allows to restore the factory value, proceed as follows: default options. To activate this option follow 1. Switch the appliance on by pressing steps below: Aan/Uit button.

  • Page 20: Filling The Detergent And Additives

    4. Close the door firmly. Flap for powder or liquid detergent. Always follow the instructions that you find on the packaging of the detergent products, but we recommend that you do not exceed the maximum indicated level ). This quantity will however guarantee the best washing results.

  • Page 21: Starting A Programme With The Delay Start

    4. To use liquid detergent, turn the flap 3. If desired, set one or more options by down. touching the related buttons. The related indicators come on in the display and the given information changes accordingly. In case a selection is not possible, no indicator comes on and an acoustic signal sounds.

  • Page 22: The Prosense Load Detection

    The related indicator stops flashing and stays The programme starts, the door is locked. The ProSense is not available with some programmes, such as Wol/Zijde, The display shows the indicator programmes with short cycles and without washing phase. The drain pump can operate shortly 12.9 Interrupting a programme and before the appliance fills water.

  • Page 23: End Of The Programme

    When you activate the appliance again, If the temperature and level of the water the display show the end of the last in the drum are too high and/or the drum selected programme. Turn the still rotates you cannot open the door. programme dial to set a new cycle.

  • Page 24: Hints And Tips

    • After 5 minutes from the end of the washing programme Press the Aan/Uit button to activate the If you set a programme or an option that appliance again. ends with water in the drum, the Stand- The display shows the end of the last set by function doesn't deactivate the programme.

  • Page 25: Ecological Hints

    13.4 Ecological hints • Use only detergents and other treatments specially made for washing machines. To save water, energy and to help protect the First, follow these generic rules: environment, we recommend that you follow – powder detergents for all types of these tips: fabric, excluding delicate.

  • Page 26: Removing Foreign Objects

    14.4 Descaling Indicative periodic cleaning schedule: Descaling Twice a year Maintenance wash Once a month If the water hardness in your area is high Clean door seal Every two months or moderate, we recommend that you use a water descaling product for Clean drum Every two months washing machines.

  • Page 27: Cleaning The Drum

    Clean it when needed, using ammonia cream out under running warm water, to remove cleanser agent without scratching the seal any traces of accumulated detergent. surface. After cleaning, put the top part back into position. Always obey the instructions that you find on the packaging of the product.

  • Page 28: Cleaning The Drain Pump

    14.9 Cleaning the drain pump Regularly check the drain pump filter and make sure that it is clean. Clean the drain pump if: • The appliance does not drain the water. • The drum does not turn. • The appliance makes an unusual noise because of the blockage of the drain pump. •...

  • Page 29: Cleaning The Inlet Hose And The Valve Filter

    WARNING! Make sure that the impeller of the pump can rotate. If it does not rotate, contact the Authorised Service Centre. Make sure also that you tighten the filter correctly to prevent leakages. 14.10 Cleaning the inlet hose and 2. Remove the inlet hose from the appliance the valve filter by loosening the ring nut.

  • Page 30: Frost Precautions

    'Cleaning the drain pump' paragraph. If necessary, clean the pump. 14.12 Frost precautions If the appliance is installed in an area where the temperature can reach the values around 0° C or drop below, remove the remaining water from the inlet hose and the drain pump. 1.
  • Page 31 Problem Possible solution • Make sure that the water tap is open. • Make sure that the pressure of the water supply is not too low. For this infor‐ The appliance does not fill mation, contact your local water authority. with water properly.
  • Page 32 Problem Possible solution • Set the spin programme. • Make sure that the drain filter is not clogged. Clean the filter, if necessary. Re‐ The spin phase does not op‐ erate or the washing cycle fer to "Care and cleaning". lasts longer than usual.

  • Page 33: Consumption Values

    16. CONSUMPTION VALUES 16.1 Introduction See the web link www.theenergylabel.eu for detailed information about Energy Label. The QR code on the energy label supplied with the appliance provides a web link to the information related to the performance of the appliance in the EU EPREL database. Keep the energy label for reference together with the user manual and all other documents provided with this appliance.

  • Page 34: Quick Guide

    Power consumption in different modes Off (W) Stand-by (W) Delay start (W) 0.50 0.50 4.00 Time to Off/Standby mode is 15 minutes maximum. 16.4 Common programmes These values are indicative only. Programme rpm 1) Litres hh:mm °C Katoen 2.450 80.0 4:05 52.00 85.0...

  • Page 35: Cleaning The Drain Pump Filter

    Connect the mains plug to the mains socket. 2. Set the desired options (1) by means of the corresponding touch buttons. To start Open the water tap. the programme, touch the Start/Pauze Load the laundry. (2) button. 3. The appliance starts. Pour the detergent and other treatment in the At the end of the programme, remove the proper compartment of the detergent...

  • Page 36: Environmental Concerns

    Programmes Load Product description All fabrics, except woollens and very delicate fabrics. Programme 8 kg Centrifugeren/Pompen for spinning and draining the water. Tested for Staphylococcus aureus, Enterococcus faecium, Candida albicans, Pseudomonas aeruginosa and MS2 Bacteriophage in external test performed by Swissatest Testmaterialien AG in 2021 (Test Report No. 202120117).
  • Page 40 135975991-A-432023...

Table of Contents