MELICONI TLC09+ Manual
  1. Manuals
  2. Brands
  3. MELICONI Manuals
  4. Remote Control
  5. TLC09+
  6. Manual
MELICONI TLC09+ Manual

MELICONI TLC09+ Manual

For tv sets hisense
Hide thumbs
1
2
3
4
5

Advertisement

Table of Contents

TLC09+
/ PJN21064
Remote control for TV sets HISENSE ready to use
Thank you for choosing a Meliconi remote control.
Before starting to use the product, read carefully and completely this manual and the
safety warnings
This remote control, after inserting the batteries, is normally ready for use as it is already set at the factory with a
specific code.
If problems are found to command the TV, or some functions do not produce the desired effect, to follow the
instructions to the chapter ACTIVATION OF REMOTE CONTROL.
HISENSE
The TLC03+ remote control is designed to command a
digital television sets.
The MELICONI remote control reproduces infrared signals corresponding to the original; the functions that operate in radio frequency
(e.g. voice commands and pointers) are not supported.
The remote control has a permanent memory, so it does not lose its settings even if there are no batteries in it.
SAFETY WARNINGS
Before using the product, it is recommended to read the safety warnings
included in the package and available at the following link:
https://www.cme.it/meliconi/safety.pdf
INSERTING THE BATTERIES
The remote control requires 2 new 1.5V AAA/LR03 alkaline batteries, not included in the package. Insert with the
correct polarity as shown in figure.
DO NOT use rechargeable batteries.
5
BATTERIES TEST: Press and hold the
button and check that the LED remains on continuously until the button
is released. If the light is off or blinks, the inserted batteries are low, therefore they need replacement.
Do not leave exhausted batteries inserted, as liquid may leak and damage the remote control
ACTIVATION OF REMOTE CONTROL
Before using the remote control, for each device you wish to control, it is essential to set a specific code, it matched.
Identify the specific code and set it into the remote control using one of the following ways:
SMARTPHONE
MANUAL
TABLET - WEB
SEARCH
SMARTPHONE - TABLET - WEB
Use the qr-code on the side or connect to the
www.cme.it
page and follow the instructions.
Once you have found the specific code for your device, set it in the remote control as described in the ENTERING
THE CODE DIRECTLY chapter.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TLC09+ and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for MELICONI TLC09+

Summary of Contents for MELICONI TLC09+

  • Page 1 The TLC03+ remote control is designed to command a digital television sets. The MELICONI remote control reproduces infrared signals corresponding to the original; the functions that operate in radio frequency (e.g. voice commands and pointers) are not supported. The remote control has a permanent memory, so it does not lose its settings even if there are no batteries in it.

  • Page 2: Manual Search

    BUTTONS AND FUNCTIONS The functions of the buttons on the MELICONI remote control are only available if the original device is equipped with it. Sometimes some functions of the original remote control are not directly present on the MELICONI remote control keypad.

  • Page 3: Reset The Remote Control

    3. While the LED remains on, enter the code 1600. 4. While the LED flashes, within 30 seconds, on the MELICONI remote control press the button which you want to delete the function 5. Repeat the procedure from point 3 for each function you want to delete on MELICONI remote control.

  • Page 4: Troubleshooting (Faq)

    If necessary try to the RESET OF THE REMOTE CONTROL and carry out a new activation. ● IF SOME FUNCTIONS ARE NOT AVAILABLE ON THE REMOTE CONTROL Usually the MELICONI remote control makes available only the present functions on his keyboard, provided they are available also on the original remote control.

  • Page 5: Disposal Of The Product

    The symbol of the bins, indicating that the batteries should be disposed of according to current regulations; inquire on collection of spent batteries and accumulators in force in your country. Meliconi SpA, Via Minghetti 10 - 40057 Cadriano di Granarolo Emilia, (BO) Italy web: www.meliconi.com email: info@meliconi.com...

Table of Contents