Serial Tablet Problems; General Problems - Wacom GRAPHIRE - WINDOWS User Manual

SERIAL TABLET PROBLEMS

The computer does not have
an available serial port.
The tablet power light is off.
The Graphire tool buttons do
not work and the screen cursor
will not move.

GENERAL PROBLEMS

The Graphire Pen selects
everything, will not stop
drawing.
The eraser selects everything
or will not stop erasing.
Remove an existing peripheral serial device and any associated
device drivers for that hardware, or add an additional serial port.
Then install Graphire.
Make sure your Graphire tablet is properly connected. Be sure your
computer is off before disconnecting or connecting your tablet.
Refer to Serial Tablet Installation
light still does not turn on, you may have a defective tablet (see
Contacting Technical
Open the Wacom control panel and go to the C
that T D
ABLET RIVER
If you do not have a mouse attached to your computer, use the T
key to select the checkbox and then press the spacebar to toggle the
driver on.
Open the Wacom control panel and go to the tool's T
Move the T P
IP RESSURE
O button and increase the C
PTIONS
Open the Wacom control panel and go to the E
the E P
RASER RESSURE
O button and increase the C
PTIONS
Contents
Index
for instructions. If the tablet's power
Support).
ON is checked. If not, use your mouse to select it.
F slider toward F
EEL
F
LICK
F slider toward F
EEL
F
LICK
tab. Verify
ONNECTION
F tab.
IP EEL
, or select the M
IRM
setting.
ORCE
F tab. Move
RASER EEL
, or select the M
IRM
setting.
ORCE
HAVING TROUBLE?
Page 94
AB
ORE
ORE