Wacom GRAPHIRE - WINDOWS User Manual page 98

After pressing C +A
TRL
the screen cursor cannot be
controlled with your Graphire
tools.
Windows 98 or Me. When
working with multiple
monitors, the screen cursor
positioning is incorrect after
moving into the unmapped
area of the virtual desktop.
Windows NT 4.0. Application-
specific settings do not work
correctly or blue screen crash
occurs.
+D , When the C
LT EL
T M
ASK ANAGER
work.
Use your mouse or keyboard to continue. When this dialog box is
closed, you can again use your Graphire tool to control the screen
cursor.
On a multiple monitor system, the tablet is mapped to the virtual
desktop (a rectangular area covering all monitors). In the Wacom
control panel's P
represents the entire virtual desktop.
If your video display areas do not form a rectangle because they are
different sizes or they are not evenly aligned, the screen cursor
positioning will be incorrect after moving into the unmapped area of the
virtual desktop. To reestablish the correct screen cursor position, lift
your Graphire tool out of tablet proximity and bring it back into
proximity over an area of the tablet that is mapped to a display area.
You must update the operating system with Service Pack 3 (SP3) or
later in order for application-specific settings to work correctly.
Running your Graphire tablet software on a Windows NT 4.0 system
that is not updated to SP3 may cause you to experience a blue screen
crash.
Contents
Index
P dialog box (Windows 95, 98, or Me) or the
LOSE ROGRAM
(Windows 2000) is active, the Wacom tablet will not
D
ORTION OF ISPLAY
dialog box, the screen rectangle
HAVING TROUBLE?
Page 98