Wacom GRAPHIRE - WINDOWS User Manual page 95

You notice a screen delay at
the beginning of pen strokes.
You have to press hard with
the Graphire Pen when clicking
or drawing.
The Graphire Pen tip does not
function.
The side switch does not work. Be sure you press the side switch when the pen tip is in proximity—do
In the Wacom control panel, try decreasing the D
D or increasing the double-click speed (see
ISTANCE
Click). If that does not work, try unchecking the D
checkbox.
Open the Wacom control panel and go to the tool's T
Move the T P
IP RESSURE
O button and decrease the C
PTIONS
Make sure the status LED changes from orange to green when the tip
is pressed. If it does not, you may have defective hardware (see
Troubleshooting).
Check the control panel's T
assigned to a L
EFT
this without pressing down on the pen tip.
From the Wacom control panel, verify that the side switch is set to the
proper function for the application and tool that you are using.
Make sure the tablet status LED changes from orange to green when
you press the side switch. If it does not, you may have defective
hardware (see Troubleshooting).
Contents
Index
F slider toward S
EEL
LICK
B
OOL UTTONS
-C function.
LICK
-C
OUBLE LICK
Adjusting Double-
-C
OUBLE LICK
F
IP EEL
, or select the M
OFT
F setting.
ORCE
tab and verify that the tip is
HAVING TROUBLE?
Page 95
A
SSIST
tab.
ORE