Testing Your Graphire Tools; Testing The Graphire Pen - Wacom GRAPHIRE - WINDOWS User Manual

TESTING YOUR GRAPHIRE TOOLS

From the Wacom control panel's H
The tablet driver version, tablet hardware and connection, and pointing device information is shown.

Testing the Graphire Pen

1. While observing the P
tablet. A value for proximity, the device name, and device type should be displayed.
2. Move the pen along the tablet surface. The X and Y D
position.
3. Test your Graphire Pen buttons. The tablet's status LED should change color from orange to green
each time you click with the pen tip, press the side switch, or press the pen's eraser to the tablet.
• Click on the tablet surface with the pen tip—the S
change. (P
RESSURE
approximately 100% when full pressure is applied.)
• Next, press the side switch without pressing the tip to the tablet—the S
change. (Do this for both positions of the DuoSwitch.)
Pen Tip = 1, DuoSwitch (lower position) = 2, DuoSwitch (upper position) = 3, Eraser = 1
• Then press the pen's eraser to the tablet—the S
(P should change from approximately 0% with no pressure applied to approximately 100%
RESSURE
when full pressure is applied.)
4. When you are done, click on the C
menu, select D
ELP
TESTING THE GRAPHIRE PEN
TESTING THE GRAPHIRE CORDLESS MOUSE
D
OINTING EVICE
should change from approximately 0% with no pressure applied to
LOSE
Contents
Index
IAGNOSTICS
I column, bring your Graphire tool within proximity of the
NFO
values should change to reflect the tool
ATA
WITCHES
WITCHES
button to exit the dialog box.
... to open the D
IAGNOSTICS
state and P
RESSURE
WITCHES
state and P
RESSURE
HAVING TROUBLE?
dialog box.
value should
state should
value will change.
Page 91