Unpacking The Kit - NI PXIe-7822 Getting Started

against harmful interference when the product is operated in its intended
operational electromagnetic environment.
This product is intended for use in residential, commercial, and industrial locations.
However, harmful interference may occur in some installations or when the product
is connected to a peripheral device or a test object. To minimize interference with
radio and television reception and prevent unacceptable performance degradation,
install and use this product in strict accordance with the instructions in the product
documentation.
Furthermore, any changes or modifications to the product not expressly approved
by National Instruments could void your authority to operate it under your local
regulatory rules.
Notice
only with shielded cables and accessories. Do not use unshielded cables or
accessories unless they are installed in a shielded enclosure with properly
designed and shielded input/output ports and connected to the product
using a shielded cable. If unshielded cables or accessories are not properly
installed and shielded, the EMC specifications for the product are no
longer guaranteed.
Caution
on, ferrite beads (777297-01) per connected I/O cable in accordance with
the product installation instructions.
Notice
connected to the input port(s) must be no longer than 3 m (10 ft).

Unpacking the Kit

Notice
device, ground yourself using a grounding strap or by holding a grounded
object, such as your computer chassis.
4
ni.com
To ensure the specified EMC performance, operate this product
To ensure the specified EMC performance, install two (2) snap-
To ensure the specified EMC performance, the length of any cable
To prevent electrostatic discharge (ESD) from damaging the
PXIe-7822 Getting Started