• All rivet holes drilled 13/64” dia. • Use 1/4” disposable shim strips. • The PJP3 Model restroom assembly will require two people. • These instructions are for restrooms shipped unassembled. If you receive assembled units, please retain these instructions for maintenance and repair purposes.
Page 6
Stand the three side panels PC-000100 Rivet PC-000106 Washer with two corner moldings upright. 18 Used in this step 18 Used in this step PJP3 A/I - March 2014 Page 6 of 12...
Page 7
PC-000103 - Rivets while someone inside places PC- 000106 - Back-up Washers on the rivet stems. PC-000106 Washer PC-000103 Rivet 8 Used in this step 8 Used in this step PJP3 A/I - March 2014 Page 7 of 12...
Place the seat/lid on to the tank (inserting the bolts through the holes in the tank). Use pliers to TS1-0001 tighten the nuts. Seat (2) Hinge Bolt (2) - Nut PJP3 A/I - March 2014 Page 8 of 12...
Page 9
(2) PC-000105 PC-000105 Rivet Rivets. 2 Used in this step PJP3 A/I - March 2014 Page 9 of 12...
Page 10
Depress the pump a few times to “prime” it. The pump has a built in check valve that will hold the prime between uses. PJP3 A/I - March 2014 Page 10 of 12...
OUR MISSION STATEMENT “PolyJohn is a family owned, state of the art, plastics manufacturing company dedicated to providing its employees with a work environment committed to excellence, and its customers with innovative products, services and technology that meet or exceed their requirements.”...
Need help?
Do you have a question about the PJP3 and is the answer not in the manual?
Questions and answers