Change Channel; Transmission Rate - D-Link DGL-4500 - GamerLounge Xtreme N Gaming Router Wireless User Manual

Section  - Configuration
Enable Auto
The Auto.Channel.Scan setting can be selected to allow the DGL-4500 to choose the channel with the least amount of
Channel Scan:
interference.
Wireless Channel:
Indicates the channel setting for the DGL-4500. By default the channel is set to 6. The Channel can be changed to fit the
channel setting for an existing wireless network or to customize the wireless network. If you enable Auto.Channel.Scan,
this option will be greyed out.

Transmission Rate:

Select the transmit rate. It is strongly suggested to select Best.(Auto) for best performance.
Channel Width:
Select the Channel Width:
Auto.20/40 - Select if you are using both 802.11n and non-802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless clients. This is the default setting.
40MHz - Select if you are using 802.11n wireless clients only.
Visibility Status:
Select Invisible if you do not want the SSID of your wireless network to be broadcasted by the DGL-4500. If Invisible is
selected, the SSID of the DGL-4500 will not be seen by Site Survey utilities so your wireless clients will have to know the
SSID of your DGL-4500 in order to connect to it.
Wireless Security:
Refer to page 66 for more information regarding wireless security.
D-Link DGL-4500 User Manual