Download Print this page

Advertisement

Quick Links

EXISTING NETWORK > NEW NETWORK
DGL-4300
Quick Install
Guide+

Advertisement

loading

Summary of Contents for D-Link DGL-4300

  • Page 1 EXISTING NETWORK > NEW NETWORK DGL-4300 Quick Install Guide+...
  • Page 2: Quick Install Guide

    QUICK INSTALL GUIDE MODEL: DGL-4300 Existing Network > New Network ©2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice.
  • Page 3: Wireless Antenna

    D-Link® Gaming Router. To attach the rubber feet, simply press the rubber feet into the four corners on the bottom panel of the D-Link® Gaming Router. Wireless Antenna...
  • Page 4 Disconnect the Ethernet cable connected from your computer to your broadband modem. Leave the end connected to your broadband modem attached. Connect the end of the Ethernet cable removed from your computer to the WAN port on the router. Connect the provided Ethernet cable from a numbered port on the router to your computer.
  • Page 5 Note: If the WAN LED is not lit, check the connection of the Ethernet cable from the Broadband modem to the WAN port of the D-Link® Gaming Router as detailed in steps 2-3. If the LAN LED is not lit,...
  • Page 6 Launch your web browser and type in a web address such as http://games.dlink.com to verify that you have an Internet connection. If a web address is not accessible, enter http://192.168.0.1 in your web browser address bar. Once the main screen appears, press the button labeled Internet Connection Setup Wizard and proceed through the wizard.