Advertisement
PRO1D V11.122 series MID
DIN rail single phase two wire energy meter
User manual
Version 1.0
® 2011
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
1.10
1.11
1.12
1.13
- 1 -
Safety instructions
Foreword
MID certificates
Type number table
Performance criteria
Specifications
Basic errors
Description
Dimensions
Installation
Operation
Troubleshooting
Technical support
User manual 0014
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Inepro PRO1D V11.122 Series
Summary of Contents for Inepro PRO1D V11.122 Series
- Page 1 PRO1D V11.122 series MID DIN rail single phase two wire energy meter Safety instructions Foreword MID certificates Type number table Performance criteria Specifications Basic errors Description Dimensions 1.10 Installation 1.11 Operation 1.12 Troubleshooting 1.13 Technical support User manual Version 1.0 ®...
-
Page 2: Qualified Personnel
The equipment (device, module) may only be used for the application cases specified in the catalog and the user manual and only in connection with devices and components recommended and approved by Inepro Metering B.V. Proper handling The prerequisites for perfect, reliable operation of the product are proper transport, storage, installation and connection, as well as proper operation and maintenance. -
Page 3: Exclusion Of Liability
® DMMetering is a registered trademark of Inepro Metering – member of the Inepro Group. Other names appearing in this manual may be trademarks of third parties and are property of their respectful owners. 1.2 Foreword Thank you for purchasing the DMMetering PRO1 series DIN rail single phase two wire energy meter. - Page 4 1.3 MID certificates ® 2011 - 4 - User manual 0014...
- Page 5 ® 2011 - 5 - User manual 0014...
- Page 6 1.4 Type number table: The PRO1 series is labeled as follows: PRO1D/TE V 11 . x x x Pulse led and pulse output: 1 = 1000 impulses / kWh 2 = 2000 impulses / kWh Reverse counting: 1 = Does not count when energy is reversed 2 = Counts up regardless of energy direction Type of display: 1 = LCD without backlight...
- Page 7 1.7 Basic errors: 0.05Ib Cosφ = 1 ±1.5% 0.1Ib Cosφ = 0.5L ±1.5% Cosφ = 0.8C ±1.5% 0.1Ib - Imax Cosφ = 1 ±1.0% 0.2Ib - Imax Cosφ = 0.5L ±1.0% Cosφ = 0.8C ±1.0% 1.8 Description Register Terminal block Case Protection cover Security wire slot...
-
Page 8: Installation
1.10 Installation CAUTION Turn off and if possible lock all sources supplying the energy meter and the equipment that is connected to it before working on it. Always use a properly rated voltage sensing device to confirm that power is off. -
Page 9: Pulse Output
phase line in phase line out neutral line in neutral line out 20 and 21 Pulse output contact 1.11 Operation Consumption indication There is a two color LED on the front panel of the meter. When the meter is powered on and no load is connected to it, the LED lights up green. -
Page 10: Troubleshooting
1.12 Troubleshooting CAUTION During repair and maintenance, do not touch the meter connecting clamps directly with your bare hands, with metal, blank wire or other conducting material as that will cause an electric shock and possibly cause injury. Turn off and if possible lock all sources supplying the energy meter and the equipment that is connected to it before opening the protection cover before working on it. - Page 11 Problem Check Solution The consumption Is there any load Only if there is a load on the meter LED is not flashing connected to the will this LED flash. (PULSE LED). meter? If the load is very low, the time Is the load on the between 2 flashes is very long.
- Page 12 1.13 Technical support For questions about one of our products please contact: The Inepro Metering dealer in your region Your local Inepro Metering distributor Email: support@ineprometering.com www.ineprometering.com ® 2011 - 12 - User manual 0014...
Need help?
Do you have a question about the PRO1D V11.122 Series and is the answer not in the manual?
Questions and answers