Related Manuals for Inepro PRO380-Compact/V/DIN
Summary of Contents for Inepro PRO380-Compact/V/DIN
- Page 1 PRO380-Compact/V/DIN PRO380-Compact/V/DIN User manual Version: 0.03 © 2025 inepro Metering B.V. All rights reserved...
-
Page 3: Table Of Contents
A1.3 Modbus register map - Write ........16 3 - inepro Metering - PRO380-Compact... -
Page 4: Safety Instructions
Use for the intended purpose This device may only be used for the application cases specified in the catalog and the user manual and only in connection with devices and components recommended and approved by inepro Metering B.V. Proper handling The prerequisites for perfect, reliable operation of the product are proper transport, storage, installation and connection, as well as proper operation and maintenance. - Page 5 It is prohibited to pass on or copy this document or to use or disclose its contents without express permission of inepro Metering BV. Any duplication is a violation of the law and subject to criminal and civil penalties. All rights reserved, particularly for pending or approved patent awards or registered trademarks.
-
Page 6: Foreword
3 Foreword Thank you for purchasing this energy meter. inepro offers a wide range of devices. We have introduced numerous energy meters to the market, designed for use with 110V AC to 400V AC (50 or 60Hz) and up to 1000V/1500A DC. For more information on other products, please contact our sales department at sales@ineprometering.com or visit our... -
Page 7: Certificates
Following the provisions of the Directives (If applicable); technical specifications 2014/32/EU (MID) _________________________________________________ Place and date of issue Nieuw-Vennep, 14-08-2023 _________________________________________________ Name of responsible for CE-Marking D. van der Vaart 7 - inepro Metering - PRO380-Compact... -
Page 8: Specifications
Cannot read data from the EEPROM ERR 0C Energy data check error. Difference in value of energy (integer kWh) between LCD (main stora- ge in EEPROM) and backup part of EEPROM Software related problem. 8 - inepro Metering - PRO380-Compact... -
Page 9: Rs485 Communication Specifications
Phase 2 output L3 (IN) Phase 3 input L3 (OUT) Phase 3 output N (IN) Neutral input N (OUT) Neutral output 3Phase/4wire 1 & 2 Modbus communication contact 3 & 4 External tariff input 9 - inepro Metering - PRO380-Compact... -
Page 10: Installation
If installed in an area with frequent surges (e.g., from thunderstorms, welding machines, or inverters), the meter should be protected with a Surge Protection Device. • Seal the device immediately after installation to prevent tampering. 10 - inepro Metering - PRO380-Compact... -
Page 11: Operation
A constant 12V signal is necessary to maintain activation of T2 or T3. The 12V signal overrules the modbus tariff setting. On the meter there’s a LED which indicates with tarrif is active; LED off LED on LED blinking Tariff 11 - inepro Metering - PRO380-Compact... -
Page 12: Troubleshooting
Use insulated tools to maintain or repair the meter. • Make sure the protection cover is in place after maintenance or repair. • The case is sealed, failure to observe this instruction can result in damage to the meter. 12 - inepro Metering - PRO380-Compact... -
Page 13: Appendix - Modbus
(120 ohms, 0.25 watts) must be placed across A and B on the meter side. For details on the registers used in the meter and data interpretation, please refer to the Modbus register map on the pages below 13 - inepro Metering - PRO380-Compact... -
Page 14: A1.2 Modbus Register Map - Read
Float - (ABCD) V 5008 Grid Frequency Read Float - (ABCD) Hz 500C L1 Current Read Float - (ABCD) A 500E L2 Current Read Float - (ABCD) A 5010 L3 Current Read Float - (ABCD) A 14 - inepro Metering - PRO380-Compact... - Page 15 T2 Total Reactive Energy 6028 Read Float - (ABCD) kWh L1 Total Reactive Energy 602A Read Float - (ABCD) kWh L2 Total Reactive Energy L2 Total Reactive Energy 602C Read Float - (ABCD) kWh 15 - inepro Metering - PRO380-Compact MRF-0318 V1.03...
-
Page 16: A1.3 Modbus Register Map - Write
01 06 4021 0002 Command: Set backlight off 01 = ON – 02 = OFF 6048 Tarrif 0001 signed Command: 01 06 6048 0002 (new tariff = 02) 01: T1 / 02: T2 / 03: T3 16 - inepro Metering - PRO380-Compact... - Page 17 17 - inepro Metering - PRO380-Compact...
Need help?
Do you have a question about the PRO380-Compact/V/DIN and is the answer not in the manual?
Questions and answers