Wireless Client Mode - D-Link DAP-2553 - Wireless N Dual Band Gigabit Access Point User Manual

Section 3 - Configuration
Wireless Band: Select either 2.4GHz or 5GHz from the drop-down menu.
Mode:
Wireless Client is selected from the drop-down menu.
Network Name
Service Set Identifier (SSID) is the name designated for a specific
(SSID):
wireless local area network (WLAN). The SSID's factory default setting
is dlink. The SSID can be easily changed to connect to an existing
wireless network.
SSID Visibility:
This option is unavailable in Wireless Client mode.
Auto Channel
Enabling this feature automatically selects the channel that will
Selection:
provide the best wireless performance. This feature is not supported
in Wireless Client mode.
Channel:
The channel used will be displayed, and matches the AP that the
DAP-2553 is connected to when set to Wireless Client mode.
Channel Width:
Use the drop-down menu to choose 20 MHz or Auto 20/40 MHz.
Site Survey:
Click on the Scan button to search for available wireless networks,
then click on the available network that you want to connect with.
Use the drop-down menu to choose Open System or
WPA-Personal.
Authentication:
Select Open System to communicate the key across the network.
Select WPA-Personal to secure your network using a password and
dynamic key changes. No RADIUS server is required.
Enable:
Check to enable clone MAC. This feature will allow you to change the
MAC address of the access point to the MAC address of a client.
MAC Source:
Select the MAC source from the drop-down menu.
MAC Address:
Enter the MAC address that you would like to assign to the access
point.
D-Link DAP-553 User Manual

Wireless Client mode