Static Ip - D-Link DAP-1360 User Manual

Section 3 - Configuration
Select Static IP if all WAN IP information is provided to you by your ISP. You will need to enter in the IP address, subnet
mask, gateway address, and DNS address(es) provided to you by your ISP.
IP Address: 192.168.1.1 is the default WAN IP Address
of the DAP-1360.
Subnet Mask:
255.255.255.0 is the default subnet mask.
All devices on the network must have the
same subnet mask to communicate on
the network.
Default Gateway: Enter the IP Address of the gateway in
your network.
MTU Size:
You m ay nee d to c han g e th e MTU
(Maximum Transmission Unit) for optimal
performance with your specific ISP. The
default MTU size is 1500.
Primary DNS Server: Enter the Primary DNS (Domain Name
System) server IP address assigned by
your ISP.
Secondary DNS Server: Enter the Secondary DNS (optional) server IP address assigned by your ISP.
Clone MAC Address: The default MAC address is set to the MAC address on the AP (Access Point). You can click the Clone Your PC's MAC
Address button to replace the AP's MAC address with the MAC address of your Ethernet card. It is not recommended
that you change the default MAC address unless required by your ISP.
D-Link DAP-1360 User Manual

Static IP

49