Dmz (Wisp Modes Only) - D-Link DAP-1360 User Manual

Section 3 - Configuration
This function is available only if the DAP-1360 is in the WISP Client Router or WISP Repeater mode. This feature allows
you to set up a DMZ (Demilitarized Zone) host. If you have a client PC that cannot run Internet applications properly
from behind the DAP-1360, then you can set the client up for unrestricted Internet access. The DMZ allows a computer
to be exposed to the Internet. This feature is useful for gaming purposes. Enter the IP address of the computer that will
be the DMZ host. Adding a client to the DMZ may expose your local network to a variety of security risks, so only use
this option as a last resort.
Enable DMZ:
Check this box to enable DMZ.
DMZ Host IP
Enter the IP address of the computer you
Address:
would like to open all ports to. You can select a
computer from the Computer Name drop-down
menu and click << to enter the computer name
into the DMZ Host IP Address field.
D-Link DAP-1360 User Manual

DMZ (WISP modes only)

59