Configure Wpa-Psk - D-Link DAP-1360 User Manual

Section 5 - Connecting to a Wireless Network
It is recommended to enable WEP on your wireless bridge or access point before configuring your wireless adapter. If
you are joining an existing network, you will need to know the WEP key being used.
1. Open the Windows
®
on the wireless computer icon in your system tray
(lower-right corner of screen). Select View Available
Wireless Networks.
2. Highlight the wireless network (SSID) you would like to
connect to and click Connect.
D-Link DAP-1360 User Manual

Configure WPA-PSK

XP Wireless Utility by right-clicking
81