Port Forwarding (Wisp Modes Only) - D-Link DAP-1360 User Manual

Section 3 - Configuration
This function is available if your DAP-1360 is in the WISP Client Router or WISP Repeater mode. This feature allows
you to open a single port or a range of ports. Click Save Settings and the port forwarding rule will be put into the Port
Forwarding List.
Port Forwarding
Check the box to configure a port forwarding
Rules:
rule.
Name:
Enter a name for the rule. You can select an
application name from the Application Name
drop-down menu. Click the << button to fill in
the Name field with the application name that
you selected.
IP Address:
Enter the IP address of the computer on your
local network that you want to allow the incoming
service to.
Start/End Ports:
Enter the port or ports that you want to open. If
you want to open one port, enter the same port
in both boxes.
Traffic Type:
Select TCP, UDP, or Both.
D-Link DAP-1360 User Manual

Port Forwarding (WISP modes only)

57