Lens - Toshiba 6410A - CCTV Camera Instruction Manual

6. LENS

Back-Focus Adjusment
Back-Focus is adjusted at the factory to accommodate most standard lenses.
Sometimes, slight adjustment to the camera back-focus is
necessary.
Loosen the Focus Lock Screw. Achieve a clear image by
rotating the focus ring.
Tighten the Focus Lock Screw.
Auto-iris Lens
This camera supports two types of auto-iris lens: Video
and DC (direct drive) types. Connect the auto-iris
connector plug to the IRIS terminal on the side of the
camera. Refer to the chart below for correct wiring and
IRIS terminal
pin
IRIS Switch
01_p2-p32
Downloaded from www.Manualslib.com
Video IRIS
Lens
1 +12V
2 NC
3 VIDEO
4 GND
VIDEO position
9
manuals search engine
Direct Drive
IRIS Lens
Damp – (y)
Damp + ( )
Driver + (wh)
Driver – (g)
DC position
- 9 -
Focus Lock Screw
Focus ring
IRIS
Auto-iris lens
2 1
4 3
Camera Side
06.8.7, 11:08 AM