Table of Contents
Advertisement
Adjusting the Lens
Based on the live image retrieved from the camera, adjust the camera lens by
performing the following:
Using an analog monitor
This camera is able to output an analog NTSC video signal from the Video Out jack.
Adjustment of Viewing angle is possible using a portable monitor without using a
personal computer when installing.
Use the included Video Out cable for this purpose.
To adjust the viewing angle
1. Turn the lens module left and right.
2. Loosen the tilt adjustment screws on both side of the camera and then turn the lens
module up and down. Upon completion, tighten the screws.
3. Turn the lens cover to adjust the image orientation.
Pan 350°
20
20
Loosen
1
Tilt: 70°
Tighten
2
Rotate 340°
DO NOT over rotate the lens. Doing
so will damage the camera lens
module
3
Advertisement
Table of Contents
