Record Snapshots To Your Ftp Server - D-Link DCS-3420 - Wireless Day And Night Internet Camera Network User Manual

Section 3 - Configuration

Record Snapshots to your FTP server

Administrators can combine options on the application page to perform many useful security applications. To upload
the snapshots, users can choose either email or FTP according to the user's needs. Both e-mail and FTP use the
network settings on the network page. This section describes how to enable motion detecting and record snapshots
to an FTP server.
Administrators can utilize the built-in motion detection to monitor any abnormal movement and then record the snapshots
to a FTP server.
In this window, follow the steps below to ensure that motion detection is correctly enabled:
1 Check "Enable motion detection."
2 Click on "New" to have a new window to monitor video.
3 Enter in a window name.
4 Tune the "Sensitivity" and "Percentage" according to the local
environment. Combined higher sensitivity with lower percentage
gives you high sensitivity for the motion detection.
5 Click on save to enable the activity display.
Next, click the Mail & FTP button under the Advanced tab to set the FTP server settings for the DCS-3420.
D-Link DCS-340 User Manual 4