Xylem sensus PolluStat Installation And Operating Instructions Manual
Heating / cooling meter
Hide thumbs
Also See for sensus PolluStat:
- Operating instructions manual (107 pages) ,
- User manual (22 pages)
Related Manuals for Xylem sensus PolluStat
Summary of Contents for Xylem sensus PolluStat
- Page 1 Heating / Cooling meter PolluStat Installation and operating instructions PolluStat Installation and operating instructions M H 4200 INT PolluStat, page 1...
-
Page 2: Table Of Contents
Heating / Cooling meter PolluStat Installation and operating instructions The ultrasonic meter PolluStat is suitable for the 1. Important directions measurement of energy consumption in heating or cooling plants filled with the energy carrier liquid water. These installation and operating instructions specify the installation and the operation of PolluStat and its variants. -
Page 3: Technical Data
Heating / Cooling meter PolluStat Installation and operating instructions 2. Technical data 4. Installation of sub-assemblies The text hereinafter includes following terms: Calculator Temperature measuring = 0 … 180 °C range h return pipe of heating plants: colder line Temperature difference ∆... -
Page 4: Installation Of Temperature Sensors
Heating / Cooling meter PolluStat Installation and operating instructions 4.2 Installation of temperature sensors Examples of installation in heating systems: PolluStat is operated with separately approved and paired temperature sensors type Pt 500. The applicable type is specified on the integrator front side. -
Page 5: Mounting Of The Integrator
Heating / Cooling meter PolluStat Installation and operating instructions 4.3 Mounting of the integrator PolluStat E is delivered with the integrator mounted on the flow sensor. Depending on the flow sensor’s installation (horizontal or vertical) the integrator can be turned through steps of 90 degrees. -
Page 6: Display Options
Heating / Cooling meter PolluStat Installation and operating instructions 5. Display options 5.1 Main menu (L1) All display items are marked with an arrow symbol The different display options of PolluStat E are at L1. divided into three menus. Depending on the type of the meter and the display masking respectively, some display items can be masked. -
Page 7: Archiv Menu (L2)
Heating / Cooling meter PolluStat Installation and operating instructions Consumption of the 5.2 Archiv menu (L2) second external meter All display items are marked with an arrow symbol at set date at L2. Display of all stored values on an adjustable (if activated) target date. - Page 8 Heating / Cooling meter PolluStat Installation and operating instructions Monthly value of the Monthly value of the second external meter minimum temperature (if activated) difference associated date stamp associated date stamp (change every second) (change every second) Monthly value of the Monthly value of the minimum temperature in maximum power...
-
Page 9: Information Menu (L3)
Heating / Cooling meter PolluStat Installation and operating instructions 5.3 Information menu (L3) Configuration of the first All display items are marked with an arrow symbol external meter at L3. Heat meter fluid “---“ means water Current power Pressure level “160E4“... -
Page 10: Functional Test, Sealing
Heating / Cooling meter PolluStat Installation and operating instructions If nominal flow rate is exceeded by more than 6. Functional test, sealing approx. 2,4 x qp, following error message is displayed: Having opened the shut-off valves, test the „Er xxx4“ installed units for leaks. -
Page 11: Remote Pulse Output / Input
Heating / Cooling meter PolluStat Installation and operating instructions Meaning of the jumper: 8.4 Remote pulse Output / Input The heat meter has two open-collector remote pulse outputs which can be configured with the jumper not set Jumper set (open) (closed) following parameters: normal mode... - Page 12 Heating / Cooling meter PolluStat Installation and operating instructions M H 4200 INT PolluStat, page 12...
- Page 13 Heating / Cooling meter PolluStat Installation and operating instructions M H 4200 INT PolluStat, page 13...
- Page 14 Heating / Cooling meter PolluStat Installation and operating instructions Edition: 005, June 2017 Subject to changes Sensus GmbH Ludwigshafen Industriestraße 16 D-67063 Ludwigshafen Phone: + 49 (0) 621 6904-1000 Fax: + 49 (0) 621 6904-1409 E-Mail: info.int@xyleminc.com Certified according to ISO 9001 www.sensus.com Quality Management System Quality Austria Reg.no.
Need help?
Do you have a question about the sensus PolluStat and is the answer not in the manual?
Questions and answers