Bosch rexroth XI110204 Installation

ctrlX I/O
Digital Input Module XI110204
4-channel, DC 24 V, 3 ms Input Filter, 2-wire
DOK-XIO***-XI110204*DI-DA02-EN-P
1 Functional description
The digital input module XI110204 is used to detect binary 24
V control signals in a ctrlX I/O station. The module has four
channels in a 2-wire technique. The signal state is shown at
the channel LED on the removable peripheral connector.
The logic and peripheral voltage supply as well as the
EtherCAT-based module communication are routed through
the module.
Fig. 1: Module XI110204
For an application manual of the ctrlX I/O modules, refer to
the media directory ⮫ www.boschrexroth.com/mediadirectory
and enter the search term ⮫ "R911423458".
Ensure that the current documentation is consulted. For
the current documentations, go to ⮫ www.boschrexroth.com/
mediadirectory and enter the module type as search term.
For the integration into the parent system, the respective
ESI files are available. For the ESI files, go to ⮫ http://
www.boschrexroth.com/electrics, search term "⮫ ESI-Files".
2 Ordering data
Type Part number
XI110204 R911417202
For more ordering data (accessories), go to the product cat-
alog under ⮫ www.boschrexroth.com/electrics.
3 Technical data
3.1 General technical data
XI110204
Number of inputs 4
Connection type Push-in
Description
Digital input module, 4-channel,
DC 24 V, 3 ms input filter, 2-
wire
XI110204
Connection tech- 2-wire technique
nique
Specification EN 61131-2, type 1/3
Input filter 3 ms
Signal voltage "0" -3 V ... 5 V
Signal voltage "1" 11 V ... 30 V
Input current Typically 2.4 mA
Reverse polarity pro- Reverse voltage-protected up to 30 V
tection of the inputs
Max. output current 1 A
per clamping point
U 24 V
OUT
Max. sum current 2 A
U 24 V
OUT
Nominal voltage (U / DC 24 V (19.2 V to 30 V, including tol-
L
U ) erance and residual ripple) PELV/SELV
P
(safety extra-low voltage)
Current consumption 26 mA
U
L
Current consumption 13 mA + load U
U
P
Max. power con- 1.26 W
sumption of the
module
Bit width in the 4 bits
process image
Configuration No address or configuration setting
required
Dimensions 12 mm × 105 mm × 99 mm (width ×
height × depth)
Weight 90 g (module including connector)
Electrical isolation DC 1200 V U
FE, tested for 60 s each
(not evaluated by UL)
EMC resistance Acc. to EN 61000-6-2 and EN 61000-6-4
Mounting position Vertical, on a horizontal mounting rail
Labeling, approvals CE, UKCA, UL
3.2 Internal schematic diagram
System bus µC
U
L
U
P
Fig. 2: Internal schematic diagram
3.3 Ambient conditions
Ambient temperature
≤ 2,000 m
2,000 m to 3,000 m
3,000 m to 4,000 m
4,000 m to 5,000 m
Maximum operating altitude
Acc. to DIN 60204
Ambient temperature
(storage and transport)
R911421693
Edition 02
O
to U , DC 707 V U /U
P L P
DI_1
.
.
.
.
Type 1/3
DI_4
Fuse 1
U 24 V
2
OUT
3
4
-25 to +55 °C
-25 to +50 °C
-25 to +45 °C
-25 to +40 °C
5,000 m
-40 to +70 °C
R911421693, Edition 02, 1 / 5
to
L