Step 1: Preparation; Step 2: Camera Server Installation And Setup - Canon Vb-C60 - Ptz Network Camera Setup Manual

Calculate how much free hard disk space will be required for the storage server from the
recording conditions to ensure that the system can operate stably.
The amount of hard disk space required can be calculated using the following formula.
Required free hard disk space
= No. of cameras x Video data size x Recording frame rate x Video retention period
(sec.)
= 4 x 50 x 1 x (60 x 60 x 24 x 14)
~ ~ 291000000 B
~ ~ 300 GB
The amount of free hard disk space required is therefore over 300 GB. However, this value
does not include the space required in the system area.
Do not use an external hard drive to store recorded video data. The video may not
Note
be recorded properly or the data may be corrupted.
/
Reference

Step 2: Camera Server Installation and Setup

Configure initial camera server settings, such as the IP address setting.
Refer to Start Guide for details of initial camera server settings.
When you use presets and preset tours, it is recommended to complete
camera server settings in advance, so that you can build the system more
Tip
efficiently.
Initial camera settings
Reference
Preset settings

Step 1: Preparation

"System Design Concept" in Administrator's Manual (P.28)
/
Start Guide
/
"Preset Setting Tool" in Operation Guide (P.2-18)
System Installation Example
2
19