Step 1: Preparation; Step 2: Camera Server Installation And Setup - Canon VK-16 v2.1 Setup Manual

Step 1: Preparation

Calculate how much free hard disk space will be required for the storage server from the recording conditions
to ensure that the system can operate stably.
The amount of hard disk space required can be calculated using the following formula.
Required free hard disk space
= No. of cameras x Video data size x Recording frame rate x Video retention period
(sec.)
= 4 x 50 x 1 x (60 x 60 x 24 x 14)
~ ~
291000000 B
~ ~
300 GB
The amount of free hard disk space required is therefore over 300 GB. However, this value does not include the
space required in the system area.
Note
Do not use an external hard drive to store recorded video data. The video may not be recorded properly or
the data may be corrupted.
Reference
"System Design Concept" in Administrator's Manual

Step 2: Camera Server Installation and Setup

Configure initial camera server settings, such as the IP address setting.
See Start Guide for details of initial camera server settings.
Tip
When you use presets and preset tours, it is recommended to complete camera server settings in advance,
so that you can build the system more efficiently.
Reference
Initial camera settings
Preset settings "Preset Setting Tool" in Operation Guide
Start Guide
VK-Lite System Installation Example
2-3