Getting started The Nortel IP Phone 2002 brings voice and data to your desktop. Introduction This guide contains information about: • telephone buttons and lights • telephone display • telephone setup • how to make and answer calls • how to use the navigation buttons •...
Getting started IP Phone 2002 button and light descriptions Figure 2 shows the IP Phone 2002 lights and buttons. Figure 2 IP Phone 2002 buttons Table 1 shows a description of the lights and buttons. IP Phone 2002 Table 1...
Programmable memory button #09 (Default: Blank) The following button is reserved for future development. PC Expansion button IP Phone 2002 telephone display There are three areas to the IP Phone 2002 telephone display: • Button label area • Information area •...
Getting started Figure 3 shows an example of the display and describes each area. Figure 3 Display area Call fwd Page gen Button label area Conference Intercom 07/24 3:12 pm Information area Forward Timer More Feature options area Button label area The button label area shows the label and status of the four programmable memory buttons.
Getting started Telephone setup This section describes the IP Phone 2002 display features: • Display contrast • Language choice • Ring type Note: For more information about the features available on your telephone and how to use them, refer to the BCM Telephone Feature User Guide.
Features and buttons This chapter describes some of the IP Phone 2002 buttons and call features: • Basic call features • Navigation buttons • Memory buttons Note: For more information about the features available on your telephone and how to use them, refer to the BCM Telephone Feature User Guide.
Features and buttons Internal calls using intercom buttons Lift the handset. Press an intercom button. Dial the extension number. Note: Contact your System Administrator for a list of extension numbers. Answer calls When your telephone rings and the light flashes, or an intercom or line button indicator flashes: •...
Handsfree, or headset calls. Time offset When your IP Phone 2002 is located in a different time zone from your system, the display shows the system time, not the local time. The Time Offset feature enables you to adjust the time that appears on the display.
Press ÷ to select the displayed setting. Memory buttons This section contains information about the IP Phone 2002 memory buttons and how to use them. These are buttons not assigned as line or intercom buttons. Memory buttons store internal and external numbers or features to give you one-touch dialing or feature activation.
Press Feature Press a memory button. Feature Press and enter the feature code. Press OK to store the feature code. Erase memory buttons Feature Press Press a memory button. Press OK to erase the button. IP Phone 2002 User Guide...
Page 14
Features and buttons N0027300 01 N0027300 01...
Need help?
Do you have a question about the 2002 and is the answer not in the manual?
Questions and answers