Peaking Freq./Peaking Level (Picture Quality Improvement); Afc (Switching Of Time Constant For The Afc); Color Temp. (Color Temperature Switching); Ntsc Setup (Ntsc Set-Up Level) - JVC BM-H1310SU - Color Production Monitor Instructions Manual

ON-SCREEN MENU CONTROLS (continued)

PEAKING FREQ./PEAKING LEVEL (picture quality improvement)

Corrects the luminance signal to improve picture quality by changing
peak frequency and/or peak level depending on the video signal input to
the monitor. Use PEAKING FREQ. to set correction frequency. Use
PEAKING LEVEL to set correction level.
Setting (ferquency)
2.6 MHz
5.0 MHz
Setting (level)
0 dB to +9 dBs

AFC (switching of time constant for the AFC)

Use to set the time constant for the AFC (auto fine-frequency control)
to correct skew distortion of video signals input via a videotape recorder
or other video equipment.
Setting
NORMAL
FAST
SLOW

COLOR TEMP. (color temperature switching)

Use to set the color temperature of white balance.
Setting
9300
6500

NTSC SETUP (NTSC set-up level)

Use to set up the luminance signal level to match the configuration
of the video signal input to the monitor.
Setting
0
7.5

COMPO. LEVEL (chrominance level setting)

Use to set the chrominance level of a component video signal.
Setting
SMPTE
BETA00
BETA75
Function
For composite video signal or Y/C signal.
For component video signal.
Function
Set a higher level for correction to a higher degree.
Function
Normal-speed correction.
Faster correction.
Slower correction.
Function
To 9300K.
To 6500K.
Function
For video signal with 0% luminance signal.
For video signal with 7.5% luminance signal.
Function
For component video signal input via an M videotape recorder.
For component video signal input (set-up level:0%) via a
BETACAM videotape recorder.
For component video signal input (set-up level:7.5%) via a
BETACAM videotape recorder.
NOTE
When analog RGB signals are input
to the monitor, the indications do not
appear and the functions cannot be
operated.
NOTE
By changing the default setting of
white balance adjustment under the
SET-UP MENU display (see page
15 for adjustment), the indication
is added to the right of the setting to
indicate that the factory-preset
setting was changed.
q MENU
ASPECT RAT I O
:4-3
F I LTER SELECT :COMB
PEAK I NG FREQ. :2.6MHZ
PEAK I NG LEVEL
:0dB
AFC :NORMAL
COLOR TEMP. :6500
NTSC SETUP
:7.5
COMPO. LEVEL :BETA75
q MEMORY MODE r
RGB / COMPO(SDI) :RGB
:
ENTER
NOTE
The item and setting are indicated
on screen and the function can be
operated only when a video signal of
the NTSC system is input to the
monitor.
NOTE
The item and setting are indicated
on screen and the function can be
operated only when a component
video signal is input to the monitor.
r
11