Set-Up For Monitor Installation; To Call Up Set-Up Menu And Select A Function; Size/Centering (Size/Positioning Adjustments Of Rgb Signal Pictures) - JVC BM-H1310SU - Color Production Monitor Instructions Manual

Color video monitor
Table of Contents

Advertisement

SET-UP FOR MONITOR INSTALLATION

When installing the monitor, make set-up adjustments required for the picture set-
tings to match conditions where the monitor is to be used.

To call up SET-UP MENU and select a function:

1.
To make 1 1 1 1 1 (SET-UP MENU) appear, with the ENTER button pressed,
press the MENU button.
2.
Press the
or
(To set STATUS DISPLAY or CONTROL LOCK, steps
necessary.)
3.
Press the ENTER button to call up the adjustment menu 2 2 2 2 2 of a selected
item (e.g. WHITE BALANCE).
4.
Press the
or
5.
Press the
or
6.
With the display 1 1 1 1 1 on screen, press the
function and repeat step
7.
Press the MENU button to complete. SET-UP MENU disappears.
To make 1 1 1 1 1 (SET-UP MENU) disappear:
Press the MENU button.
To make 2 2 2 2 2 (e.g. WHITE BALANCE) disappear:
Press the MENU button twice.

SIZE/CENTERING (size/positioning adjustments of RGB signal pictures)

For analog RGB video signal pictures, horizontal size, vertical size,
horizontal positioning and vertical positioning can be finely adjusted.
Adjustment
H.POSITION (-10,-9...0...+9, +10)
V.POSITION (-10,-9...0...+9, +10)
H.SIZE (-10,-9...0...+9, +10)
V.SIZE (-10,-9...0...+9, +10)
14
button to select an adjustment item.
button to select a function to be adjusted.
button to change the setting.
or
5
.
+ moves the picture to right.
- moves the picture to left.
+ moves the picture down.
- moves the picture up.
+ makes the picture wider.
- makes the picture narrower.
+ makes the picture higher.
- makes the picture lower.
3
4
and
are not
button to select another
Function
q
SET-UP MENU
r
S I Z E / CENTER I NG
WH I TE BALANCE AD JUST
REMOTE SELECT
S TATUS D I SPLAY : ON
CONTROL LOCK
: OFF
:
ENTER
1 1 1 1 1
WHITE BALANCE
q
r
RED DRIVE
:0
GREEN DRIVE
:0
BLUE DRIVE
:0
RED CUTOFF
:0
GREEN CUTOFF
:0
BLUE CUTOFF
:0
:
ENTER
2 2 2 2 2
NOTE
Each time the MENU button is pressed,
the previous menu is restored.
NOTE
SIZE/CENTERING appears and the
function is operable only when
monitoring the picture of analog RGB
video signals.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bm-h1900su

Table of Contents