MEMORY MODE
A set of picture settings can be programmed in memory
for quick recall when necessary.
Recall/release of memory mode
Press the MEMORY MODE switch to recall a set of picture settings
programmed in memory.
Pressing the switch locks the functions of the front-panel PHASE,
CHROMA, BRIGHT, CONTRAST controls, and remote-control picture
adjustments not to be operated.
Press again to release memory mode.
Setting programming of the picture being monitored
The settings of the picture being monitored can be programmed in
memory.
Settings programmable in memory mode:
Settings of the CONTRAST, BRIGHT, CHROMA and PHASE controls on the
front panel
On-screen menu function settings (except RGB/COMPO(SDI))
Remote-control picture adjustment settings
1.
Check the MEMORY MODE switch is off.
2.
Press the MENU button.
3.
Press the
or
Then press the ENTER button.
4.
Press the ENTER button to program.
Press the
or
Revision of memory mode
Programmed picture settings can be revised if necessary.
1.
Press the MEMORY MODE switch to activate memory mode.
2.
Press the MENU button to call up display 1 1 1 1 1 on screen.
12
button to select MEMORY MODE.
button to cancel.
NOTE
If you attempt to operate a locked
function, "MEMORY MODE ON!!"
appears on screen for approx. 2
seconds to indicate the function
cannot be operated.
NOTE
Programmed picture settings are
kept in memory after the power is
turned off.
q
MEMORY MODE
r
Are you sure ?
g
Yes
h
then
ENTER
No
then
or
g
h
NOTE
No matter what video signal is input,
all items appear on screen. How-
ever, depending on the type of input
video signal, some functions might
not operate even if their settings are
made.
q
MEMORY MODE REV I SE
P I C TURE AD JUSTMENT
ASPECT RAT I O
:4-3
F I L TER SE LEC T
:COMB
PEAK I NG
FREQ.
:2.6MHZ
PEAK I NG
LEVEL
:0dB
AFC
:NORMAL
COLOR
TEMP.
:6500
NTSC
SETUP
:7.5
COMPO. L E VE L
:BETA75
ENTER
:
1 1 1 1 1