Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Robe PATT 2013
Summary of Contents for Robe PATT 2013
- Page 1 QR code for user manual Version 1.5 CE...
- Page 2 PATT 2013 The PATT 2013 is a 750W tungsten softlight housed in a sleek spun aluminium body which maximises its curves to look as good on stage as the performers it illuminates. Safety and operating instructions The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorized modification to the device.
-
Page 3: Technical Specifications
When choosing the installation spot, please make sure that the device is not exposed to extreme heat, moisture or dust ! The device never must be covered with cloth or other materials during its operation. Only operate the fixture after having checked that the housing is firmly closed and all screws are tightly fastened. Technical specifications Mains input: 115 V for HPL 750/115 V LAMP... -
Page 4: Installing The Fixture
Always check the fixture is installed safely without a possibility to tilt it over. For overhead installation the PATT 2013 has to be always secured to the truss by means of a safety wire (that can hold at least 10 times the weight of the fixture) which is fastened to the truss and around mounting yoke of the PATT 2013. -
Page 5: Replacing The Lamp
Spigot for PATT 2013/2017/picklePATT, pixelPATT (P/N 14080053) Lamp HPL750 240V Copyright © 2016-2022 Robe Lighting - All rights reserved Specifications are subject to change without notice. May 31, 2022 Made in ROBE Lighting s.r.o., Palackého 416, 757 01 Valašské Meziříčí, Czech Republic...
Need help?
Do you have a question about the PATT 2013 and is the answer not in the manual?
Questions and answers