KMA GEMINUS Quick Start Manual

Quick Start Guide
Thank you for purchasing this GEMINUS Stereo True Double Tracker.
We hope you get many years of pleasure and use from this device and
if this is your first product from our brand, welcome!
This simple connecting guide should help start you on your journey to
doubling creativity. However, if you wish to know more of the pedal's
hidden secrets, you can find more info on the product page at:
kmamachines.com/geminus
Some quick usage examples:
For classic 'studio' double-tracking tones, first set the MODE switch to
M-ST and then plug your guitar, drive pedal(s) or other mono source
directly into the input. Using a TRS split connection from the Output,
connect to two amplifiers, modellers or any product which will accept a
stereo input. Leave the PITCH and LEVEL controls in their Centre default
positions and turn the TDT WIDTH control to 100% (fully CW). Based on
your playing or musical style, adjust the TIME control to suit. Then bask
in the glory of unprecedented True Double Tracking greatness!
For an interesting thickening of your tone beyond standard doubling,
follow the same connection example as above, but change the PITCH
switch from default to either or positions, then adjust the LEVEL
control to a pleasing midpoint between centred and 20%. The balancing
and panning magic "under the hood" in GEMINUS makes sure that your
output volume is never compromised and the pitch variations, with
reduced amount of doubling, provides added weight and depth to your
tonal adventure.
To add some pleasing stereo widening to other stereo devices,
experiment with placing GEMINUS before or after other stereo effects
units. With the MODE switch set to ST-ST, adjust the width control
gradually to find a pleasant balance for interesting variation and
expansion.
GEMINUS Main Specifications
•
Stereo True-Double-Tracker (Proprietary Doubler) pedal
•
Width Knob, provides control over the stereo field
•
Stereo or Mono connections on TRS jacks
•
Flexible signal routing (selectable Stereo or Mono In/Out)
•
Time, Pitch and Level controls, for precise TDT tailoring
•
Compact enclosure with top-mounted jacks - will fit into any setup
•
Switchable True/Buffered Bypass*
•
'Silent' relay-based soft switching
•
Premium analog electronics
•
32 Bit internal processing
Power requirements:
9 V DC, centre -, 2.1 mm, 100 mA max. current draw
Proudly made in Berlin, Germany since 2013
@kmamachines
Please follow us on social:
e-mail: hello@kma-machines.com | website: kmamachines.com
© 2025 KMA Audio Machines UG & Co.KG
GEMINUS QSG 1.01
Quick Start Guide