Download
Share
Print this page
  1. Manuals
  2. Brands
  3. KMA Manuals
  4. Music Pedal
  5. ENDGAME
  6. Manual

KMA ENDGAME Manual

Duality calibrator
Hide thumbs

Advertisement

Quick Links

Download this manual
KMA Machines ENDGAME manual ⋅ firmware version V2
https://kma.specs-and-docs.online/kma_endgame_manual__English.htm
1 von 57
08.01.2025, 14:38

Advertisement

loading
Need help?

Need help?

Do you have a question about the ENDGAME and is the answer not in the manual?

Questions and answers

Related Manuals for KMA ENDGAME

Summary of Contents for KMA ENDGAME

  • Page 1 KMA Machines ENDGAME manual ⋅ firmware version V2 https://kma.specs-and-docs.online/kma_endgame_manual__English.htm 1 von 57 08.01.2025, 14:38...
  • Page 2 KMA Machines ENDGAME manual ⋅ firmware version V2 https://kma.specs-and-docs.online/kma_endgame_manual__English.htm 2 von 57 08.01.2025, 14:38...
  • Page 3 KMA Machines ENDGAME manual ⋅ firmware version V2 https://kma.specs-and-docs.online/kma_endgame_manual__English.htm Index 1. Safety Instructions ▪ Reader Warning ▪ Power Supply Unit (PSU) Requirements ▪ ▪ Safe Usage Conditions Cleaning ▪ Maintenance ▪ Contents of the package ▪ Declaration of conformity ▪...
  • Page 4 KMA Machines ENDGAME manual ⋅ firmware version V2 https://kma.specs-and-docs.online/kma_endgame_manual__English.htm 12. Updating Firmware ▪ 12.1 Apple MacOS Installation ▪ ▪ 12.2 PC Installation/Operation 12.3 ENDGAME Firmware Update App ▪ 13. Factory Reset ▪ 14. Internal Signal Routing ▪ 15. Foot-switch Behaviour ▪...
  • Page 5 For KMA ENDGAME pedals with the original factory �rmware installed (1.04), please click here[https://kma.specs-and-docs.online/kma_endgame_manual_�rmware_1__English.htm]. Thank you for purchasing a KMA Machines ENDGAME pedal. We hope you get many years of pleasure and use from this device and if this is your �rst product from our brand, welcome! While the Quick Start Guide gives a simple guide to operation, this Main User Manual provides detailed instructions for ENDGAME’s operation.

  • Page 6: Safety Instructions

    KMA Machines ENDGAME manual ⋅ firmware version V2 https://kma.specs-and-docs.online/kma_endgame_manual__English.htm 1. Safety Instructions Before using this device, please carefully read and keep in mind the following information.  Retain this document in a safe place, as it is important for the protection of both the user and the product. ...

  • Page 7: Reader Warning

    KMA Machines ENDGAME manual ⋅ firmware version V2 https://kma.specs-and-docs.online/kma_endgame_manual__English.htm Reader Warning The triangle with an exclamation mark highlights important messages concerning the correct use of the device.  7 von 57 08.01.2025, 14:38...
  • Page 8 Power Supply Unit (PSU) Requirements ENDGAME requires a standard 9 V DC PSU (not supplied) that is capable of providing a minimum of 480 mA with a 2.1 mm Negative Centre polarity. KMA always recommends a good pedal- speci�c, transformer-isolated power supply unit or multiple isolated-output devices to prevent extraneous noise.
  • Page 9 The product must never be used near a heat source, near a �ame, in the rain, in damp areas or near any kind of liquid. When transporting ENDGAME, care needs to be taken to avoid any physical shocks that could cause physical damage which would require the assistance of a quali�ed technician.
  • Page 10 KMA Machines ENDGAME manual ⋅ firmware version V2 https://kma.specs-and-docs.online/kma_endgame_manual__English.htm Cleaning Always use a dry and soft cloth with no alcohol or solvents for cleaning. Please keep the device clean and free from dust. 10 von 57 08.01.2025, 14:38...

  • Page 11: Maintenance

    KMA Machines ENDGAME manual ⋅ firmware version V2 https://kma.specs-and-docs.online/kma_endgame_manual__English.htm Maintenance All maintenance operations must be done by service centres approved by KMA Machines or by quali�ed technicians. There are no user serviceable components inside. Never try to repair the unit by yourself.

  • Page 12: Contents Of The Package

    KMA Machines ENDGAME manual ⋅ firmware version V2 https://kma.specs-and-docs.online/kma_endgame_manual__English.htm Contents of the package The shipped package should contain: ▪ One ENDGAME in a protective canvas bag ▪ One Quick-Start guide ▪ One Warranty Card ▪ One Swag Sticker 12 von 57...

  • Page 13: Declaration Of Conformity

    KMA Machines ENDGAME manual ⋅ firmware version V2 https://kma.specs-and-docs.online/kma_endgame_manual__English.htm Declaration of conformity Manufacturer: KMA Audio Machines UG (haftungsbeschränkt) & Co.KG Tabbertstraße 10-11, 12459 Berlin, Germany Product: ENDGAME Responsible person: Enrico Preuss This product is certi�ed to be compliant to the CE, UKCA and FCC standards: ▪...

  • Page 14: Warranty

    2. Warranty KMA Machines warrants that this product shall be free of defects in parts and workmanship when used under normal operating conditions for a period of two (2) years from the date of purchase. This warranty shall apply to the original purchaser when purchased either directly from the KMA Machines webstore or from an Authorised KMA Machines dealer.

  • Page 15: Terms And Conditions

    The following Terms and conditions apply to the Extended 5-Year Warranty: Your details may be kept on �le and used by KMA Machines for direct marketing purposes and for possible future offers. This information will not be given to third parties. If you do not wish to be contacted in the future (apart from in relation to this offer) please email us at marketing@kma- machines.com.

  • Page 16: Technical Support

    3. Technical Support 3.1 Help and Advice At KMA Machines, we pride ourselves on our quality. Despite not being designed for swimming, �ring up in the air or generally �ying around, even if they do land “softly”, our machines are built to last and resist the daily routine of touring.

  • Page 17: Service & Repairs

    3.2 Service / Repairs If under warranty, and in the unlikely event of having any issues with your KMA product, depending on the local laws where you live, we would suggest in the �rst instance to please contact the dealer you purchased it from.
  • Page 18 4. About ENDGAME 4.1 Introduction The KMA Machines ENDGAME is a complete and comprehensive solution for the end of your signal chain. With its integrated Stereo FX loop, KMA’s proprietary True Double-Tracker, a DUAL mono Impulse Response loader, Auxiliary Input (also via Bluetooth) and extensive routing options, the ENDGAME is a �exible and useful utility device for all sorts of musical situations.

  • Page 19: Product Highlights

    KMA Machines ENDGAME manual ⋅ firmware version V2 https://kma.specs-and-docs.online/kma_endgame_manual__English.htm 4.2 Product Highlights ▪ The complete �nal stage of your signal chain ▪ Foot-switchable Stereo Effects Loop ▪ Dual Cabinet Simulation (DROAC Impulse Response Loader with 3 Celestion® Digital Powered Presets and 2 User slots) ▪...

  • Page 20: Panel Descriptions

    KMA Machines ENDGAME manual ⋅ firmware version V2 https://kma.specs-and-docs.online/kma_endgame_manual__English.htm 5. Panel Descriptions 5.1 Front Panel 1 – TDT WIDTH Control Use the TDT Width(Stereo True Double Tracking Doubler) control to spread your doubled signal anywhere from (1) completely centred, (2) left and right and (3) 100% left and right split.
  • Page 21 XLR or TS/TRS Outputs and both LEDs will �ash slowly. To UNMUTE, push either switch. 9 – Main LED A steady green LED indicates that ENDGAME is powered and functioning normally. 10 – BT LINK Link A blue BT LED indicates ENDGAME’s Bluetooth® status.

  • Page 22: Top Panel

    15 – AUX IN jack (Auxiliary Signal Input) Use the AUX IN 3.5 mm TRS jack to connect a stereo analog audio signal source to ENDGAME. For more information, see the “Aux Input”...

  • Page 23: Left Side Panel

    The level knob between the two DUAL HEADPHONE outputs adjusts the volume of both outputs simultaneously. 18 – FULLY BALANCED OUTPUT Jacks Connect two XLR connectors to the FULLY BALANCED OUTPUT jacks to send the ENDGAME’s stereo main mix (Left/Right) to the Front-of-House/PA system, to FRFR cabinets, a recording system etc.

  • Page 24: Right Side Panel

    The FX Loop is enabled/disabled with the FX LOOP Foot-switch (8) on the front panel. Use the TRUE DOUBLE TRACKING and DUAL IR CABINET SIMULATION toggles o set the PRE/ POST position of the FX Loop within ENDGAME’s signal chain. 24 von 57...
  • Page 25 KMA Machines ENDGAME manual ⋅ firmware version V2 https://kma.specs-and-docs.online/kma_endgame_manual__English.htm For more information, see the “Stereo FX Loop” section. 25 von 57 08.01.2025, 14:38...

  • Page 26: Internal Dip Switches

    KMA Machines ENDGAME manual ⋅ firmware version V2 https://kma.specs-and-docs.online/kma_endgame_manual__English.htm 5.5 Internal DIP Switches For extended monitoring �exibility, there are two mini–DIP switches within the ENDGAME to control various monitoring options. These are located on ENDGAME’s main circuit board (PCB) as shown here:...
  • Page 27 KMA Machines ENDGAME manual ⋅ firmware version V2 https://kma.specs-and-docs.online/kma_endgame_manual__English.htm Switch 2 – Impulse Response / Amp Simulation Bypass Switch 2 disables Ambience, Cab Impulse Response and Power Amp Simulations from the TS/ TRS Outputs. This is perfect for monitoring using regular guitar amps on stage while sending the full mix to IEM/Headphone and XLR Outputs.

  • Page 28: Setting Levels

    +/-24 dB of gain/reduction. When setting up your external gear with ENDGAME, it is advisable to take some time to ensure that volume levels for each device in your signal chain are set up correctly.
  • Page 29 ADT type solutions that are available on the market today. KMA has carried out extensive research on how to make double tracking sound exactly how we believe it should perform. We’ve spent thousands of man hours developing our own proprietary solution, even designing our own custom neural network AI with onset detection in the process.

  • Page 30: Width Control

    While many may prefer to continue going through this process authentically during the recording process, ENDGAME allows this highly impactful effect to be replicated both live and during practice, maximising audible impact as well as fuelling creative inspiration.
  • Page 31 To adjust, press and hold the DOUBLING Foot-switch while turning the TDT WIDTH knob. Turn left (CCW) for tighter timing, right (CW) for looser timing. Centre Detent is ENDGAME’s default factory position. Once you’ve found your preferred setting, release the DOUBLING Foot-switch and the Doubling Timing will be stored.
  • Page 32 C cable connected to your host device (see section 7.2) Why “Dual”? Well as the ENDGAME is a stereo device, what goes into the Left side of the Cab Simulation stays in the Left output (and vice versa relating to the Right side). However, what if...
  • Page 33 UA setting (User Slot A) ENDGAME has two storage slots for adding your own Impulse Responses. From the factory, User Slot A (U⋅A) is loaded with G12M-65 (Left) and V30 (Right).
  • Page 34 To load your own choice of IRs into these User Slots, all you require is a Mac (running macOS 10.13 or later) or a PC (running Windows 10 or later) and a relevant cable to connect ENDGAME to your computer.
  • Page 35 8.3 Power Amp Mode Power amps can make a fundamental difference to your tone. ENDGAME’s integrated Tube Power Amp Simulator is designed to replicate the overall tonal characteristics of the most common type of tube amps to give the “right” amount of sag and compression.
  • Page 36 Ambience that is representative of a medium-sized room. AMBIENCE control fully clockwise / right A lush and even more spacious effect. Note: ENDGAME’s Ambience always comes after the Dual Cab Impulse Response in the signal �ow. For more information, see the “Internal Signal Routing”...
  • Page 37 ENDGAME offers an easy to integrate and distinctive solution to this challenge. For the sake of long cable runs and to maximise signal clarity, ENDGAME’s serial Stereo FX Loop is buffered. This means you can now hear your stereo pedals and other effects in their true pristine glory.
  • Page 38 KMA Machines ENDGAME manual ⋅ firmware version V2 https://kma.specs-and-docs.online/kma_endgame_manual__English.htm 9.1 FX Loop Position When the FX LOOP is activated, the two switches on the front panel change the signal routing. For the ultimate in creative �exibility, the entire CAB Impulse Response Loader, Power Amp Simulation and Ambience block can be positioned pre or post FX Loop using the DUAL IR CABINET SIMULATION PRE/POST toggle switch.
  • Page 39 Placed directly before the Main Outputs in the signal �ow, the AUX INPUT is an excellent solution for feeding a backing track or any other stereo signal into the outputs of the ENDGAME and making it perfect for many purposes, including practicing.
  • Page 40 1. Connect the stereo output of your device to ENDGAME’s AUX IN 3.5 mm Mini TRS input. Your device should now be able to play audio through the respective outputs of the ENDGAME.
  • Page 41 To activate Bluetooth® Pairing Mode and connect a device to stream audio to ENDGAME, proceed as follows: 1. Press the BT PAIR button on the ENDGAME for approximately 4 seconds until the BT LINK LED on the front panel �ashes.
  • Page 42 ENDGAME’s internal signal and the AUX signal are 50/50 equal. AUX MIX control fully clockwise / right The AUX signal is 100% and ENDGAME’s internal signal is muted. Which outputs are active depends on ENDGAME’s Internal Dip Switch settings. For more information, see “Switch 1 – AUX BYPASS”...
  • Page 43 11. ENDGAME Setup Suggestions ENDGAME has been engineered to work in a huge variety of setup scenarios. There is a massive amount of all sorts of excellent effects out there, so it pays to experiment in your pedal order to achieve your exact tonal requirements and how to best assemble your dream rig.
  • Page 44 ENDGAME, in order that you are not duplicating the simulations. For this setup, we also recommend that both FX Loop Position toggles switches are set to PRE.
  • Page 45 “group”. Remember though that if you do use external cab and power amp simulation, for the best results you will need to ensure that these options are turned off on ENDGAME, in order that you are not duplicating the simulations. For this setup, we recommend that both FX LOOP POSITION toggles switches are set to PRE.

  • Page 46: Stereo Input

    FX loop for your stereo pedals. This will allow you to get the best bene�ts and tonality that ENDGAME provides. For this setup, you need to make sure that both FX LOOP POSITION toggles switches are set to POST.
  • Page 47 KMA ENDGAME Setup example: Rig Doubler Utilising the ENDGAME’s ability to create a dual amp setup from a mono signal, try plugging your instrument into the ENDGAME directly. Then use the left and right channels of the loop for two separate and complete mono signal chains.
  • Page 48 However, we gave an option to achieve just that. By moving the second internal dip switch to the “OFF” position, the Impulse Response, Power Amp and Ambience sections of the ENDGAME are bypassed from the TS/TRS outputs. For more information, see the “Internal DIP Switches”...
  • Page 49 So, by using the analog AUX input for your monitor mix in and the ENDGAME’s headphone out to your wired IEMs (or connected to your own IEMs wireless set up) you will have more direct control over your own levels.
  • Page 50 KMA Machines ENDGAME manual ⋅ firmware version V2 https://kma.specs-and-docs.online/kma_endgame_manual__English.htm Back to top 50 von 57 08.01.2025, 14:38...

  • Page 51: Updating Firmware

    12. Updating Firmware ENDGAME represents a signi�cant amount of development, testing and cutting edge technology. As with all complex digital devices, we may routinely seek to improve or even add new features to help you get the most out of your product. Consequently, there may be �rmware updates issued in the future.
  • Page 52 12.1 Apple MacOS Installation There are two versions of the ENDGAME Mac software, depending on the chipset of your machine. If your Mac is based on an Intel chipset, choose the Intel Installer which is compatible with MacOS 10.14 or later. However, if you have an Apple Silicon device (M1/2/3/4 etc.), choose the ARM64 Installer which is compatible with MacOS 11 or later.
  • Page 53 KMA Machines ENDGAME manual ⋅ firmware version V2 https://kma.specs-and-docs.online/kma_endgame_manual__English.htm 12.2 PC Installation/Operation For PCs running on Windows 10 or 11, follow the procedure below. 1. Download the Windows .zip �le. 2. Once this is in your download folder, unpack the zip �le (double click) and run the .exe �le inside.
  • Page 54 12.3 ENDGAME Firmware Update App To transfer a Firmware update to your ENDGAME, connect the pedal to 9 V DC power and to your computer via ENDGAME’s USB-C port and a suitable USB cable. Run the KMA Machines ENDGAME Updater app you have downloaded from the website[https://kmamachines.com/endgame#update]...

  • Page 55: Factory Reset

    KMA Machines ENDGAME manual ⋅ firmware version V2 https://kma.specs-and-docs.online/kma_endgame_manual__English.htm 13. Factory Reset In the event that you wish to return your ENDGAME to its original factory settings, proceed as follows: 1. Disconnect Power. 2. Make sure both FX Loop Position toggle switches are in the PRE position.

  • Page 56: Internal Signal Routing

    KMA Machines ENDGAME manual ⋅ firmware version V2 https://kma.specs-and-docs.online/kma_endgame_manual__English.htm 14. Internal Signal Routing KMA ENDGAME – internal signal routing This diagram shows ENDGAME’s internal audio signal routing. The position of the Stereo FX loop can be changed based on the settings of the two toggle switches on the front panel.
  • Page 57 �y. To swap between the 2 Foot-switch modes, unplug ENDGAME from 9 V DC power, then press and hold the DOUBLER Foot-switch while re-powering up the pedal. The alternate Foot-switch mode will then be active.