Usage - Epson DM-D110 - Vacuum Fluorescent Display Character Installation Manual

Usage

The DM-D110 can be used with the following equipment.
IM series. You can attach the DM-D110 to the IM series using the
"DM-D pole unit for IR" (DP-504). (See page 7.)
TM-H5000II/TM-J8000 printers. You can attach the DM-D110 to
TM-H5000II/TM-J8000 printers using the "DM-D pole unit for TM
printers (Type B)" (DP-503). (See page 9.)
TM-U375/TM-U950. You can attach the DM-D110 to the TM-U375/
TM-U950 printers using the "DM-D pole unit for TM printers
(Type A)" (DP-502). (See page 12.)
TM-H6000/TM-U675. You can attach the DM-D110 to TM-H6000/
TM-U675 printers using the "DM-D pole unit for TM printers
(Type A)" (DP-502). (See page 15.)
Other TM printers. You can attach the DM-D110 using the "DM-D
pole unit for TM printers (Type A)" (DP-502) and Velcro tapes or
screws. (See page 20.)
DM-D stand. You can attach the DM-D110 to the DM-D stand
directly using the "DM-D stand unit for DM Customer Display"
(DP-110). When using the DM-D stand, an optional power supply
unit (PS-170) is required. Also, if you want to extend the length of
the DM-D110, an optional extension support unit (DP-105) is
required. (See page 23.)
6