Download Print this page

Mi-Light MiBOXER LC2-WR Manual

2 wires 2 in 1 led controller (wifi + 2.4g)

Advertisement

Quick Links

2 Wires 2 in 1 LED Controller (WiFi + 2.4G)
Features
Color temperature, brightness dimmable
Biological rhythm and music rhythm
Push dimming
4096 level smooth dimming, mini brightness 0.1%, dimming range
0.1%-100%
One controller support max 12pcs remote ( control distance 30m)
Auto transmitting: transmit signal to another one automatically and
expand unlimited control distance
Auto synchronization: dynamic mode can synchronize and keep same for
all devices
Support DND mode and usually used for power failure area to save power
Support "TUYA SMART" APP control
Support Alexa, Google Assistant, Yandex Alice
Parameters
Product Name:
Model No.:
Input Voltage:
Output Current:
Output Power:
Output Type:
Protocol:
RF Remote Control Distance:
IP Rate:
Working Temp.:
Indicator light
SET Button
Model: LC2-WR
2 Wire 2 in 1 LED Controller
LC2-WR
DC12~48V
Max 10A
120W~480W
Constant Voltage
WiFi+2.4GHz RF
30m
IP20
-10~40°C
Dimming level:
Dimming Range:
Dimming Curve:
EMC Standard (EMC) :
Safety Standard ( LVD) :
Radio Equipment (RED):
Certi cation:
Warranty:
74.5mm
4096 levels
0.1%-100%
Logarithmic
ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-3 V2.1.1
EN 61347-1 : 2015+A1: 2021
EN 61347-2-11: 2001+A1:2019
ETSI EN 300 440 V2.2.1
CE, EMC, LVD, RED
5 Years

Advertisement

loading
Need help?

Need help?

Do you have a question about the MiBOXER LC2-WR and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Mi-Light MiBOXER LC2-WR

  • Page 1 2 Wires 2 in 1 LED Controller (WiFi + 2.4G) Model: LC2-WR Features ● Color temperature, brightness dimmable ● Biological rhythm and music rhythm ● Push dimming ● 4096 level smooth dimming, mini brightness 0.1%, dimming range 0.1%-100% ● One controller support max 12pcs remote ( control distance 30m) ●...
  • Page 2: Connection Diagram

    Connection Diagram Application Diagram Tuya Cloud WiFi Input: DC12~48V Router Alexa / Google PUSH Switch Model No.: FUT��� Remote PUSH Switch Dimming Short press the "PUSH switch" Long press the "PUSH switch" Adjust the light brightness level. Turn lights on or o .
  • Page 3 Set up output mode Set up correct output mode based on the feature of lights Se�ng method: Press "SET" bu�on con�nuously to switch output mode (a�en�on: it will log out without opera�on within 3 seconds) Output mode sheet ( confirm output mode based on color of indicator) Indicator color Red Light Green Light...
  • Page 4 2.4G RF Remote control instruc�on Linking Code Instruc�ons Power Controller Power Controller Link / Unlink bu�on Power off 10 seconds and Short press " I " bu�on Lights blink 3 �mes power on again or short 3 �mes within 3 seconds. slowly means linking press "...
  • Page 5 Auto transmi�ng Remote signal auto transmi�ng One light can transmit the signals from the remote control to another light within 30m, as long as there is a light within 30m, the remote control distance can be limitless. Auto transmi�ng / Modes auto synchroniza�on Controller Controller...
  • Page 6 Smartphone APP control instruc�on Network Configura�on (Don’t support 5G router) 1. Download and install [Tuya Smart] app Search for [Tuya Smart] in Apple or Google store or scan following QR code to download and install the app. Please open the app click "...
  • Page 7 App turn on and off “Do Not Disturb” mode (default ac�vated) Click the light which need to be set up or group control --- click “More” --- click “Power-on behavior” --- turn on or off 3 in 1 Controller 2 in 1 Controller...
  • Page 8 Alexa voice control instruc�on Please add device into [Tuya Smart] app, then start following steps 1). Open Alexa App 2). Click “More” on the bo�om of right corner 3). Click “Skills & Games” 4). Click “ ” on the top of right corner 5).
  • Page 9 Google Home voice control instruc�on Please add device into [Tuya Smart] app , then start following steps 1). Open Google Home App 2). Click “+” on the top of le� corner 3). Click “Set up device” 4). Click “Works with Google” 5).
  • Page 10 A�en�on 1. Please turn off power supply before installa�on. 2. Please ensure input voltage to be same as requirements from device. 3. Don’t disassemble device if you are not expert, otherwise it will damage it. 4. Please do not use the light in the place with widely range metal area or strong electromagne�c wave nearby, otherwise, the remote distance will be seriously affected.