Advertisement
Note: Illustrations of product, accessories, and user interface in the user manual are for reference purposes only. Actual product and functions may vary due to product enhancements.
Notes
Plug the charging cable into the charging port and connect it to a power outlet to start charging. Description of the battery level indicator status is as below:
Battery Level While Charging | Indicator Status |
0%–40% | Blinking orange |
40%–100% | Blinking white |
100% | Keeping white |
Battery Level While Working | Indicator Status |
40%–100% | Keeping white |
20%–40% | Keeping orange |
10%–20% | Blinking orange |
<10% | Quickly blinking orange three times (unable to turn on) |
Note: The shaver supports plug-and-play. When the battery is low, you can use the shaver during charging.
Never plug in or use the shaver in the shower or when the charging port is wet.
When the shaver cannot be turned on due to a low battery, it will take about 90 minutes to fully charge it. The shaver can be used for about 60 minutes after a full charge. Please charge the shaver when its battery is low. Fully charge the shaver at least once every 6 months if it will not be used for an extended period of time.
This shaver is equipped with a travel lock to prevent it from accidentally being turned on while it is inside the luggage.
Note: When the travel lock is enabled, if you press the on/off button, the travel lock indicator will blink.
To ensure optimal functionality, please clean the shaver after each use.
Note: Use the protective cover to cover the charging port while cleaning the shaver. Make sure the charging port is dry when plugging in the cable to charge.
Note: The shaver can be cleaned under a faucet (to keep the charging port dry, make sure it is firmly covered).
To ensure the performance of the shaver, it is recommended to replace the shaving head every half a year. Please go to www.mi.com to purchase a replacement.
Issues | Possible Causes | Solutions |
Poor-quality shaving | The shaving head (including blade mesh) is damaged or worn out. | Replace with a genuine shaving head. |
The shaving head is clogged up with stubbles. | Thoroughly clean the shaving head. | |
Shaver not working after pressing the on/off button | The travel lock is enabled. | Press and hold the on/off button for 2.5 seconds to unlock. |
The battery is depleted. | Connect the charging cable to charge. | |
The on/off button does not function. | Contact the after-sales service team. | |
Irritated skin after shaving | It takes a certain period of time for your skin to adapt to the shaver. | Skin irritation will fade after 2–3 weeks of use. |
Charging error | The charging port contact is poor. | Reconnect the charging cable. |
The charger may be damaged. | Replace the charger. | |
The charging ambient temperature is too low or too high. | Charge in an ambient temperature between 5°C and 35°C. | |
The shaver is damaged. | Contact the after-sales service team. | |
Usage time less than 60 minutes after being fully charged | The load on the motor is increased as the shaving head hasn't been cleaned for a long time. | Thoroughly clean the shaving head. |
It may be caused by the shaving method and beard density. | Shave in a normal way. |
Name: Xiaomi Electric Shaver S101
Model: S101
Operating Voltage/Power: 3.7 V ⎓/3 W
Input: 5 V ⎓ 1 A
IP Rating: IPX7
Charging Port: Type-C
Charging Time: Approx. 90 min
Power Consumption Off mode: ≤ 0.3 W
Time to Enter the Condition Off mode: ≤ 20 min
Input: 100–240 V~, 50/60 Hz, 0.2 A
Output: 5.0 V ⎓ 1.0 A, 5.0 W
Information Published | Value and Precision | Unit |
Manufacturer's Name | Jiangxi Jian Aohai Technology Co., Ltd. | — |
Model Identifier | A520-050100U-EU1 | — |
Input Voltage | 100–240 | V~ |
Input AC Frequency | 50/60 | Hz |
Output Voltage | 5.0 | V⎓ |
Output Current | 1.0 | A |
Output Power | 5.0 | W |
Average Active Efficiency | 73.77 | % |
Efficiency at Low Load (10%) | 64.588 | % |
No-load Power Consumption | 0.075 | W |
Use only with <A520-050100U-EU1> supply unit.
Suitable for cleaning under an open water tap
EU REP.
Xiaomi Technology Netherlands B.V.
Prinses Beatrixlaan 582, 2595BM, The Hague,
The Netherlands
contact@support.mi.com
UK REP.
Xiaomi Technology UK Limited
Davidson House, Forbury Square, Reading, Berkshire RG1 3EU
contact@support.mi.com
Manufactured for: Xiaomi Communications Co., Ltd.
Manufactured by: Shenzhen Soocas Technology Co., Ltd.
(a Mi Ecosystem company)
Address: Room 401, 402, 1101, 1102, 1103, 1104, Building 2
Chongwen Area, Nanshan iPark, No. 3370 Liuxian Avenue,
Fuguang Community, Taoyuan Subdistrict, Nanshan District, Shenzhen, China
For further information, please go to www.mi.com
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the S101 and is the answer not in the manual?
Questions and answers