D.s.c. Playback; D.s.c. Recording; Basic Shooting (D.s.c. Snapshot); Normal Playback Of Images - JVC GR-D372 - Digital Video Camera 32x Optical Zoom/800x Zoom Instructions Manual

D.S.C. RECORDING

24
EN

Basic Shooting (D.S.C. Snapshot)

You can use your camcorder as a Digital Still
Camera for taking snapshots. Still images are
stored in the memory card.
NOTE:
Before continuing, perform the procedures listed
below:
Power ( pg. 13)
Loading a Memory Card (
VIDEO/
MEMORY
1
Remove the lens cap.
2
Open the LCD monitor fully. (
3
Set the VIDEO/MEMORY Switch to
"MEMORY".
4
Set the Power Switch to "REC" while pressing
down the Lock Button located on the switch.
To change the Picture Quality,
5
Press SNAPSHOT. The " PHOTO" indication
appears while the snapshot is being taken.
To delete unwanted still images, refer to "Deleting
Files". ( pg. 27)
When you do not want to hear the shutter sound,
set "MELODY" to "OFF". (
NOTE:
If shooting is not performed for approx. 5 minutes
when the Power Switch is set to "REC" and power is
supplied from the battery pack, the camcorder shuts
off automatically to save power. To perform shooting
again, push back and pull out the viewfinder again
or close and re-open the LCD monitor.
Approximate Number of Storable Images
The number increases or decreases depending
on the Picture Quality/Image Size, etc.
Image Size/Picture
Quality
640 x 480/FINE
640 x 480/STANDARD
Image Size/Picture
Quality
640 x 480/FINE
640 x 480/STANDARD
* Optional
pg. 18)
SNAPSHOT
Lock Button
Power Switch
pg. 19)
pg. 29, 32.
pg. 29, 31)
SD Memory Card*
8 MB 16 MB 32 MB 64 MB
47 95 205 425
160 295 625 1285
MultiMediaCard*
8 MB 16 MB 32 MB
55 105 215
190 320 645

D.S.C. PLAYBACK

Normal Playback Of Images

Images shot with the camcorder are
automatically numbered, then stored in
numerical order in the memory card. You can
view the stored images, one at a time, much like
flipping through a photo album.
2 2 2 2
6
1 1 1 1
VIDEO/
MEMORY
7
1
Load a memory card. (
2
Set the VIDEO/MEMORY Switch to
"MEMORY".
3
Set the Power Switch to "PLAY" while
pressing down the Lock Button located on the
switch.
A stored image is displayed.
4
Press to display the previous file. Press
1
display the next file.
NOTE:
Images shot and stored on the card with another
device with resolutions other than "640 x 480" will
be displayed as thumbnails only. These thumbnail
images cannot be transferred to a PC.
Lock Button
Power Switch
MENU
pg. 18)
to
2