Table of Contents
Advertisement
Zoom Buttons
SHIFT
Left or SLOW
Rewind Button
Right or SLOW
Forward Button
Zoom Buttons
SHIFT
Left or SLOW
Rewind Button
Right or SLOW
Forward Button
Normal playback
Downloaded from:
Remote sensor
Up Button
Down
Button
PLAY
PAUSE
STOP
RM-V716U (provided with
GR-DVL600/DVL400)
Up Button
T
W
Down
Button
PLAY
PAUSE
STOP
RM-V711U (provided with
GR-DVL500/DVL300)
Press T
To move image,
press
(Right)
while keeping
SHIFT held down.
https://www.usersmanualguide.com/
Slow-Motion Playback
FEATURE:
PURPOSE:
To allow slow-speed search in either direction during
playback.
OPERATION:
1) To change from normal to Slow-Motion Playback, press
PAUSE (6) to engage Still Playback then press SLOW
(9 or 0) more than approx. 2 seconds. After approx. 1
minute in Slow Rewind or approx. 2 minutes in Slow
Forward, normal playback resumes.
To stop Slow-Motion Playback, press PLAY (4).
NOTES:
● During Slow-Motion Playback, due to digital image
processing, the picture may take on a mosaic effect.
● After SLOW (9 or 0) is pressed and held, the still
image may be displayed for a few seconds, followed by
a blue screen for a few seconds. This is not a malfunc-
tion.
● There may be a small margin between the slow-motion
playback start point you chose and the actual start
point for Slow-Motion Playback.
● During Slow-Motion Playback, there will be distur-
bances in video and the picture may seem unstable,
especially with steady images. This is not a malfunc-
tion.
● During Slow-Motion Playback, press PAUSE (6) to
pause playback.
Frame-By-Frame Playback
FEATURE:
PURPOSE:
To allow frame-by-frame search during playback.
OPERATION:
1) To change from normal to Frame-By-Frame Playback,
press PAUSE (6) to engage Still Playback then press
SLOW (0) repeatedly for forward or SLOW (9)
repeatedly for reverse. Each time it is pressed, the frame is
played back.
Playback Zoom
FEATURE:
PURPOSE:
To magnify the recorded image up to 10X at any time
during playback.
OPERATION:
1) Press PLAY (4) to find the scene of interest.
2) Press the Zoom Buttons (T/W) on the remote control.
Make sure the remote control is pointed at the
camcorder's remote sensor. Pressing T zooms in.
3) You can move the image on screen around to find a
particular portion of the picture. While holding down
SHIFT, press
(Left),
(Down).
To end zoom, press and hold W until magnification
returns to normal. Or, press STOP (5) and then press PLAY
(4).
NOTES:
● Zoom can also be used during slow-motion and still
playback.
● Due to digital image processing, the quality of the
image may suffer.
41
EN
(Right),
(Up) and
Advertisement
Table of Contents
