Important Assembly Tip Before you begin, we advise laying everything out on a clean and soft level surface to avoid damaging the unit or your floor. It's best to identify all of the parts and fittings to build your storage with seat , and to familiarise yourself with all of the parts and fittings before building. Top Tip We recommend that you build your new storage with seat in the room you'd like it to be located.
Parts checklist Please check you have all the parts listed below with your product: Do not discard any of the packaging until you have checked that you have all the parts and the pack of fixings. Note: There are 2 styles of Part 1, both assemble identically so please follow the same instructions for whichever style you have chosen.
Helpful hints WARNING: Open and close the doors to make sure they are aligned and shut correctly. If necessary, adjust the screws and bolts for a good fit. Figure 1: Adjust these 4 screws to adjust the up and down direction of the door. Figure 2: Adjust the bolt to adjust the front and rear direction of the door.
Need help?
Do you have a question about the Poppy Storage with Seat and is the answer not in the manual?
Questions and answers