Download Print this page


Upright Vacuum Cleaner
Thank you
for your
Owner's Manual
Read this manual before
operating cleaner
pp. 1-12
pág. 13-20
p. 22-28


   Summary of Contents for Hoover U5269900

  • Page 1: Upright Vacuum Cleaner

    Upright Vacuum Cleaner Read this manual before Thank you for your purchase! Owner’s Manual ENGLISH ESPAÑOL pág. 13-20 FRANÇAIS p. 22-28 operating cleaner pp. 1-12...

  • Page 2: Table Of Contents

    • Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, take it to a Hoover Factory Service Center or Authorized Hoover Warranty Service Dealer (Depot).

  • Page 3: Getting Started

    If you need any assistance: Visit our website at Click on the “Service” button to find the service outlet nearest you OR Call 1-800-944-9200 for an automated referral of service outlet locations (U.S. only) OR Call 1-330-499-9499 to speak with a representative in our Consumer Response Center.

  • Page 4: How To Use

    2. How to use Cleaner description Polarized plug To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug.

  • Page 5: Handle Positions

    Handle positions The handle of your cleaner has three posi- tions; upright when using cleaning tools; operating position for general operation on carpet and floors; low for reaching under low furniture. Step on handle release pedal to lower handle. Carpet height adjustment The cleaning of carpet and rugs takes place at the nozzle (D).

  • Page 6: Cleaning Tools

    2-11 Stair cleaning A stair cleaning handle has been designed for ease in using your cleaner on stairs. With handle in operating posi- tion, place fingers under edge of stair cleaning handle and guide cleaner with other hand on upper handle. As an alternative, you may use the hose and furniture nozzle for stair cleaning.

  • Page 7: Cleaning Filters

    How to clean tools To clean the hose, wipe off dirt with a cloth dampened in a mild detergent. Rinse with a damp cloth. Cleaning tools may be washed in warm water with a detergent. Rinse and air dry before using. Remove lid.

  • Page 8: Replacing Headlight

    Let filter air dry then reposition. Replace lens and screws. Should you want to replace this filter, ask for HOOVER part no. 38765024 (filter package part no. 40110004). Do not operate cleaner without any of the filters in place.

  • Page 9: Replacing Belt

    Using a screwdriver, remove the two screws as shown and lift off lens. Belt replacement The belt on your Hoover cleaner causes the agitator to rotate and is important for the effective operation of the cleaner. The belt is located under the hood of the...

  • Page 10: Lubrication

    Therefore, do not add lubricant to motor bearings. The agitator brush roll is equipped with two ball bearings that should be lubri- cated periodically by a Hoover Factory Service Center or an Authorized Hoover Warranty Service Dealer (Depot).

  • Page 11: If You Have A Problem

    • calling 1-800-944-9200 for an automated referral of authorized service outlet locations (U.S. only). Do not send your cleaner to The Hoover Company in North Canton for service, this will only result in delay. If further assistance is needed, contact...

  • Page 12: Clearing Blockages

    The Hoover Company on-line at This warranty does not cover pick up, delivery, or house calls; however, if you mail your appliance to a Hoover Factory Service Center for warranty service, transportation will be paid one way. While this warranty gives you specific...

Comments to this Manuals

Symbols: 0
Latest comments: