Assembling Cleaner - Hoover S3612 - Household Vacuum Cleaners Owner's Manual

Questions or
Concerns?
The Hoover Company wants to quickly
resolve any concerns about your cleaner
or questions regarding its use. Look on
the list provided with the product for
your local Hoover Factory Service
Center or in the Yellow Pages under
"Vacuum Cleaners - Household" for the
nearest Authorized Hoover Warranty
Service Dealer (Depot) or:
Visit us online at www.hoover.com to
find the service outlet nearest you
(click on the "Service" button) OR
Call 1-800-944-9200 for an automated
referral of authorized service outlet
locations (U.S. only OR
Call 1-330-499-9499 to speak with a
representative in the Hoover
Consumer Response Center.
PLEASE DO NOT RETURN THIS
PRODUCT TO THE STORE OR SEND
IT TO NORTH CANTON FOR SERVICE.
5
B
Attach nozzle and wands
Attach the wand to the power noz-
5
zle by fitting button projection (B)
on nozzle connector (C) into opening
near end of wand. Be sure nozzle is
locked in place.
To release, press down on center of
latch (D) and remove nozzle.
3
How to assemble
Connect hose
With hose toward front of cleaner,
3
push hose connector into opening
in bag lid.
When hose is attached properly, hose
cord plug will reach to receptacle on
cleaner.
6
D
C
Attach second wand to the first.
6
Position cord into cord clips (E) on
wands, placing excess cord between
nozzle and bottom cord clip.
4
Insert plug as deeply into the
4
receptacle as possible. Latch (A)
will automatically fasten. Cleaner will
not operate unless plug is inserted into
receptacle.
To disconnect hose, first remove hose
cord plug from receptacle while pulling
out on latch. Then, depress buttons
(shown in Fig. 3 by arrows) on hose
connector and pull up.
Note: The flexible hose contains
electrical wires for connection to the
power nozzle and should not be used
if damaged. The wires should not be
seen through the outer skin.
7
E
To attach the hose to the extension
7
wands, push latch (F) on the hand
grip to the unlock
Push the hand grip (G) down onto wand
so that the button projection (H) fits into
the slot. Push the latch to the lock
symbol to secure wand.
A
G
F
H
symbol.
Continued
3