Related Manuals for Hoover TurboPOWER TurboPOWER WindTunnel Canister Cleaner with Powered Hand Tool
Summary of Contents for Hoover TurboPOWER TurboPOWER WindTunnel Canister Cleaner with Powered Hand Tool
- Page 1 H o o v e r TurboPOWER WindTunnel Canister Cleaner with Powered Hand Tool www.hoover.com ® Review this manual before operating cleaner. Owner’s Manual English pp. 1-14 Español pàg.15-22 Français p. 23-30...
-
Page 2: Table Of Contents
Your cleaner is model________________________________________________________ and has serial number ______________________________________________________ It is suggested that you attach your sales receipt to this owner’s manual. Verification of date of purchase may be required for warranty service of your Hoover product. Index Assembling Cleaner...3-4 Cleaner Description...4... -
Page 3: Assembling Cleaner
1-800-944-9200 for an automated referral of authorized service outlet locations (U.S. only) OR 1-330-499-9499 to speak with a representative in the Hoover Consumer Response Center. OR Visit us online at www.hoover.com to find the service outlet nearest you (click on the “Service”... -
Page 4: Cleaner Description
Attach second wand to the first. Position cord into cord clips (E) on wands, plac- ing excess cord between nozzle and bottom cord clip. Note: For some models, bottom cord clip is on wand storage clip. 2. How to use Cleaner description The assembled cleaner will look like the drawing. -
Page 5: Polarized Plug
Polarized plug To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. -
Page 6: Edge Cleaning
2 - 7 Hard surface floor cleaning The power nozzle can be used for cleaning hard surface floors such as wood, linoleum, vinyl, asphalt and rub- ber tile, sealed cork, concrete and ter- razzo, as well as carpet. To set the power nozzle for hard surface floor cleaning, push the floor surface selector button toward “BARE”... -
Page 7: To Clean Stairs
2 - 1 2 To connect tools to metal wands, insert end of tool into wand and snap into posi- tion. To disconnect, press down on the center of spring latch and remove tool. 2 - 1 5 Wand storage clip To save storage space, stand the clean- er on end and hook wand storage clip on bottom of cleaner. -
Page 8: Maintenance Cleaning Filters
Close bag lid. Where to buy Filter bags may be purchased from Authorized Hoover Dealers (Depots), Leading Retailers, Hoover Factory Service Centers, or through The Hoover Company online at www.hoover.com What to buy In order to maintain the original cleaning... -
Page 9: Replacing Power Nozzle Belt
Use only a genuine HOOVER Belt p a rt n o . 4 0 2 0 1 1 8 0 when a belt replacement is n e c e s s a ry. -
Page 10: Replacing Agitator Brush Roll
Replace 3 short scre w s . What to buy When purchasing a new agitator bru s h roll, ask for HOOVER p a rt n o .4 8 4 1 4 - 0 7 1 . How to replace Disconnect cleaner from electrical outlet. -
Page 11: Replacing Powered Hand Tool Agitator Brush Roll
What to buy When purchasing edge groomers, ask for Hoover p a rt n o . 3 9 5 1 1 0 0 4 . How to replace Disconnect cleaner from electrical outlet. -
Page 12: Lubrication
Hoover Company online at w w w. h o ov e r. c o m Please do not send your cleaner to The Hoover Company in North Canton for ser- vice, this will only result in delay. If further assistance is needed, contact... -
Page 13: If You Have A Problem
4. If you have a problem If a minor problem occurs, it usually can be solved quite easily when the cause is found by using the check list below. Problem: Cleaner won’t run Possible cause Possible solution • Not “ON”at cleaner. •... -
Page 14: Warranty
Full Two Year Warranty (Domestic Use) Your HOOVER® appliance is warr a n t e d in normal household use, in accord a n c e with the Owner’s Manual against original defects in material and workmanship for a period of two full years from date of p u rchase.