Use The Web Browser Interface - Honeywell Intermec IF2 User Manual

Use the Web Browser Interface

IF2 Network Reader User Manual
After the IF2 is assigned an IP address, configure the IF2 using the
web browser interface.
To use the web browser interface, the IF2 must be connected to your
wired network. For help, see
page 17.
When using the web browser interface, remember that your session
automatically terminates if you do not use it for 15 minutes.
Note: If you access the Internet using a proxy server, add the IF2 IP
address to your Exceptions list. The Exceptions list contains the
addresses that you do not want to use with a proxy server.
1 Determine the IP address of the IF2. If a DHCP server assigned the
IP address, you need to get the IP address from that server.
2 Start the web browser.
3 In the browser address field, enter the IP address, and press Enter.
The IF2 login screen appears.
Or, for a secure session, click A secure session is available. The
secure login screen appears.
Chapter 1 — About the RFID Reader
"Connect the IF2 to Your Network" on
11