Management Over A Web Console; Before Getting Started - Honeywell 30 Series User Manual

30 Series Network Video Recorder User Guide
7 Management over a Web
Console
This chapter contains the following sections:
•

Before Getting Started

•
Login on page
•
Live View Screen
•
Search Recording Clips Screen
•
Settings on page 72.
There are two different interfaces on the system:
•
One is connecting mouse and keyboard, and an HDMI cable to a TV screen or monitor.
The local management thus made is described in Section One of this manual.
•
The other is accessed through the Ethernet connection. Management via a web console
will be described in this chapter of this manual.
When accessed over the network, the total streaming
Note
throughput is 128Mbps.
Before Getting Started
•
Before operating the NVR, make sure you have properly installed hard drives and
configured the storage volumes. Otherwise, you will not be able to operate some of the
system's functionality.
•
When you log in to the Liveview or Playback interface to stream a live or recorded video,
install the ActiveX plug-ins. If it does not prompt when you log in, install plug-ins when
you try to playback a recorded video. You may then need to re-start the IE browser
console.
60
on page 60.
61.
on page 62.
on page 68.
WAN/LAN