Related Manuals for WEG PLC410
Summary of Contents for WEG PLC410
- Page 1 Driving efficiency and sustainability Webpage PLC410, PLC500, PLC500MC Application Note...
- Page 2 Application Note PLC410, PLC500, PLC500MC Document: 10010166064 Revision: 01 Publication Date: 01/2025...
-
Page 3: Summary Of Revisions
SUMMARY OF REVISIONS The information below describes the reviews made in this manual. Version Revision Description 1.4.2 Inclusion of the PLCs models PLC410 and PLC500MC. 1.0.0 First Edition. -
Page 4: Table Of Contents
CONTENTS 1 INTRODUCTION ..............1.1 STEP 1: CONNECTING VIA ETHERNET OR USB . -
Page 5: Introduction
INTRODUCTION 1 INTRODUCTION This Application Note aims to provide information regarding the access and use of the Webpage of WEG PLCs, models PLC410, PLC500 and PLC500MC. The functions and details presented in this note may change slightly due to the development and updating of the products. -
Page 6: Step 3: Accessing The Webpage
INTRODUCTION Go to Network & Internet Settings and select the desired interface. NOTE! To use the USB/USB2 interface, install the WEG USB-Ethernet Driver, available on the PLC500 product page at the website. Open the Properties of the connection and double-click Internet Protocol Version 4 (TCP/IPv4). - Page 7 After logging in, the user can navigate through the Status, Configuration, Visualization, and Administration menus. Detailed information on each menu of the webpage can be found in the following chapters of this Application Note. Status Page Configuration Page Visualization Page Administration Page PLC410, PLC500, PLC500MC | 1-3...
-
Page 8: Status Page
Operating Time: Elapsed time since the last power-up of the product. RAM Memory Usage: Percentage of RAM memory used, current value used, and total value. Internal Memory Usage: Percentage of internal memory used, current value used, and total value. Internet Connection: Internet connection status (Connected/Disconnected). PLC410, PLC500, PLC500MC | 2-1... -
Page 9: Network Information
While navigating through the product’s webpage, you may find information icons ( ) and alert icons ( ). Hovering over these icons will display a description, as shown below: 1.4.2 NOTE! The Logout button is always available in the top right corner of the webpage. 2-2 | PLC410, PLC500, PLC500MC... -
Page 10: Configuration Page
In the Clock field, it is possible to adjust the PLC’s date and time. There are two ways to make these adjustments: For manual adjustment, select a date and time and click on Set clock manually. To synchronize the PLC’s date and time with your computer, click on Sync with computer clock. PLC410, PLC500, PLC500MC | 3-1... -
Page 11: Temporary Ip
Codesys ftp directory. To do this, enable these options in Share External Devices, selecting the specific device to be made available. Figure 3.3 shows the SDcard and USB folders made available on the ftp server. 3-2 | PLC410, PLC500, PLC500MC... -
Page 12: Restore Factory Data
The screen in Figure 3.5(a) will open. Enter the current username and password, and click on Verify Login. Next, the screen in Figure 3.5(b) will open. Enter the new username and password, and click on New Login. PLC410, PLC500, PLC500MC | 3-3... - Page 13 In case of a lost password, it is possible to reset the credentials through CODESYS via the PLC Shell, or perform a Factory Reset of the product via SmartMedia or PLC Shell. For more information, refer to the product manual. 3-4 | PLC410, PLC500, PLC500MC...
-
Page 14: Visualization Page
/ 3 4 = / > 0 = / = / 2 1 ? @ A B C @ D B @ E = F GC / 1 / NOTE! By default, the digital inputs and outputs are configured as DIs and DOs. To change the configuration to Encoder or PWM, use the Codesys software. PLC410, PLC500, PLC500MC | 4-1... -
Page 15: Administration Page
To perform a firmware update, follow the steps below: Access the website and download the latest available firmware version. Figure 5.2 shows the Download Center page, where the available firmware update files and WEG product packages for Codesys can be found. PLC410, PLC500, PLC500MC | 5-1... - Page 16 ADMINISTRATION PAGE Figure 5.2: Download Center from the WEG website. Click on Choose File and select the firmware file downloaded to your computer. Click on Start Firmware Download. A confirmation screen will be displayed. Click OK to start the update or Cancel to abort the operation.
-
Page 17: Download A New Application
After the boot application download, all previous applications will be deleted and the Codesys will reboot. Figure 5.5: Application upload confirmation screen. Once the files are uploaded, all previous applications will be deleted, and the PLC will restart. PLC410, PLC500, PLC500MC | 5-3... -
Page 18: Retrieve System Logs
Both logs can be downloaded by the user by clicking the respective Upload Log button. 5.4 UPDATE HISTORY In the Firmware Versions field, a detailed history containing information about the latest firmware updates, with new features, improvements, and fixes for each version, can be found. 5-4 | PLC410, PLC500, PLC500MC... - Page 19 BRAZIL WEG DRIVES & CONTROLS - AUTOMAÇÃO LTDA. Av. Prefeito Waldemar Grubba, 3000 89256-900 - Jaraguá do Sul - SC Phone: 55 (47) 3276-4000 Fax: 55 (47) 3276-4060 www.weg.net/br...
Need help?
Do you have a question about the PLC410 and is the answer not in the manual?
Questions and answers