Download Print this page
Kenmore 44042 Operating Instructions
Kenmore 44042 Operating Instructions

Kenmore 44042 Operating Instructions

Advertisement

Available languages

Available languages

Quick Links

Before Operating Your Washer
Read your washer Use and Care Guide. It has
important safety and warranty information. It also
has many suggestions for best washing results.
To reduce the risk of fire, electric shock,
or injury to persons, read the IMPORTANT SAFETY
INSTRUCTIONS in your washer Use and Care Guide
before operating this appliance.
Operating Steps
Read and follow Washing Procedures in your Use
and Care Guide. It provides detailed information for
preparing the wash load and choosing control
settings to ensure best washing results.
1. Sort laundry into loads that can be washed
together.
2. Prepare items for washing.
Printed in U. S. A.
OPERATING INSTRUCTIONS
3. Pretreat stains and heavy soil.
4. Add laundry load to the wash drum.
5. Open the dispenser drawer and add the
measured amount of detergent to the
detergent compartment. If desired, add liquid
bleach and fabric softener to the appropriate
compartments. Slowly close dispenser drawer.
The washer will not operate with the drawer
open.
6. Set Temperatures switch according to fabric
type and soil level of each load.
7. If desired, select Extra Rinse .
8. Select Final Spin Speed as desired.
9. Push in the cycle selector knob and turn it
clockwise to the desired wash cycle and
setting.
10. Start the washer by closing the door and
pulling out the cycle selector knob. The
washer will not operate with the door open.
As a safety measure, the door will
automatically lock during the entire wash
cycle. When the door is closed, the Door Lock
Indicator lights up when the washer starts, and
turns off at the end of the cycle.
To stop the washer, push in the cycle
selector knob.
To change a cycle, push in the cycle
selector knob and turn it clockwise to the
desired setting.
Pull out the knob to restart the washer.
11. Remove items when cycle ends. A signal
will sound at the end of the cycle when the
Cycle Signal ON is selected.
Note: From time to time you may see water in
the bleach and fabric softener compartments.
This is a result of the siphoning action and is
part of the normal operation of the washer.
P/N 134344100 (0312)
44042

Advertisement

loading
Need help?

Need help?

Do you have a question about the 44042 and is the answer not in the manual?

Questions and answers

Betsy
July 14, 2025

What are dimensions of kenmore front load washer 44042

Summary of Contents for Kenmore 44042

  • Page 1 OPERATING INSTRUCTIONS 44042 Before Operating Your Washer 3. Pretreat stains and heavy soil. 10. Start the washer by closing the door and pulling out the cycle selector knob. The 4. Add laundry load to the wash drum. washer will not operate with the door open.
  • Page 2 Cycle Selection Delicates and Hand Washables Cycle Auto Temp Control The normal temperature of warm and cold wash water For best results, follow the fabric care label directions Up to 11 minutes of gentle tumble action for the gentle care of knit, delicate and hand washable items. can be affected by the hot water heater setting and on items to be washed.
  • Page 3 INSTRUCCIONES PARA EL FUNCIONAMIENTO 44042 ® MEDIUM SHORT CYCLE SIGNAL EXTRA CARE el sentido de las agujas del reloj hasta el Antes de poner la lavadora ciclo de lavado deseado. 2. Prepare las prendas para el lavado. en funcionamiento 10. Ponga la lavadora en marcha cerrando la 3.
  • Page 4 Selección de ciclos Temperatura de control automático Ciclo Delicates and Hand Washables (Auto Temp Control) Para obtener los mejores resultados, siga las (Ciclo delicados y lavable a mano) La temperatura normal con agua tibia y fría puede ser instrucciones de la etiqueta de la prenda que va a Un lavado de una duración de 11 minutos para lavado afectada por el arreglo del calentador de agua caliente y lavar.