Brother CT-1200 Operation Manual page 8

OPERATING INSTRUCTIONS
HOW TO USE THE ON BOARD TOOLS
Place the vacuum cleaner in the Upright position.
1 Set the Tools/Floor Selector to the
"TOOLS" position.
Detach the telescopic wand from the
2
back of the vacuum.
Then select the tool best suited for
3
the cleaning task from the descrip-
tions below.
Telescopic wand
For reaching ceilings, curtains,etc.(Fig.15)
Turn the wand to unlock; wand will turn freely.
Extend the wand to its full length. Then turn the
wand to lock.(Fig.12)
Crevice tool
For door tracks, narrow spots, etc.(Fig.13)
Combination Expandable Stair/Floor/Uphol-
stery tool with Detachable Brush.(Fig.16-2)
Use with the brush for covered furniture, table
tops, books, lamps, baseboards , etc.
Use without the brush for draperies, mattresses,
clothing, carpeted stairs, etc. (Fig.14)
Combination Stair/Floor/Upholstery tool with Detachable Brush
Pull both ends outward for the Upholstery
tool to expand. (Fig.16-1)
To return to the original size, push both
ends toward the center.
To detach the brushes, grasp them on the
inside (Fig. 16-2) and pull out toward you.
Snap them back in to replace.
8
Telescopic wand
Combination
Expandable Stair/Floor/
Upholstery Tool with
Detachable Brush
Floor / Tools Selector
Crevice tool
1
2
Fig.15
Fig.16-1
Fig.11
Fig.12
Fig.13
Fig.14
Fig.16-2