Management Through Telnet Or Terminal Emulation - Compaq 204451-002 - UPS T2200 XR Introduction Manual

Management through telnet or terminal emulation

The HP PDR Management Module can be accessed through a service menu that provides an alternate
interface for situations where the web interface is not feasible or is temporarily unavailable. The
service menu is accessed through a serial port using either a local device running a terminal emulator
program or a remote device running a telnet session. The service menu provides a number of
functions through a hierarchy of submenus shown in Figure 10.
Figure 10. Service menu hierarchy (top three levels)
Service Menu
1 Module Configuration
2 Pass-Through (by-
passes the management
module and allows direct
communication with the
PDR )
3 Exit (exits the service
menu and resets the
management module)
Note
All information and functions found in the service menu are available
in the web interface.
Module Configuration menu
1 PDR Monitor
2 Network Configuration
3 ModBus Configuration
4 System Configuration
5 User Accounts
s Save new changes and restart
r Restore Configuration to
Manufacturer Settings
PDR Monitor menu
1 PDR Alarms
2 PDR Meters
0 Previous Menu
Network Configuration menu
1 Network Settings
2 Remote Console
3 Web Access
4 File Transfer
5 SNMP
6 Session Settings
0 Previous Menu
ModBus Configuration menu
1 Modbus Protocol
Selection
2 RTU Device Address
[1 to 247]
3 TCP Device Address
[0 to 255]
4 TCP Device Port
0 Previous Menu
System Configuration menu
1 Date/Time
Configuration
0 Previous Menu
User Accounts menu
1 Change User Name
2 Change Password
3 Administrator
Privilege
0 Previous Menu
10